
HEATER UNIT
KA-ZH215U INSTRUCTIONS
Thank you for purchasing the JVC option hater unit.
To obtain the best results from your new camera, read these instructions carefully before use; retain the manual for future reference.
For Customer Use:Enter below the Serial No. which is located on the body.
Retain this information for future reference.
Model No.
Serial No.
These instructions are forThese are general IMPORTANT SAFEGUARDS and certain items may not apply to all appli- ances.
IMPORTANT SAFEGUARDS
1.Read all of these instructions.
2.Save these instructions for later use.
3.All warnings on the product and in the operating instructions should be adhered to.
4.Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
5.Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.
6.Do not use this appliance near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
7. Do not place this appliance on an unstable cart, stand, or table. The appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the manufacturer, or sold with the appliance. Wall or shelf mounting should follow the manufacturer's instructions,
and should use a mounting kit approved by the manufacturer. An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
8. Slots and openings in the cabinet and the back or bottom are
should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface.
This appliance should never be placed near or over a radiator or heat register. This appliance should not be placed in a
9.This appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. For appliance designed to operate from battery power, refer to the operating instructions.
10.For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it form the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and
11.Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be abused by persons walking on it.
12.Follow all warnings and instructions marked on the appliance.
13.Do not overload wall outlets and extension cords as this can result in fire or electric shock.
14.Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.
15.Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
16.Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the appliance.
c.If the appliance has been exposed to rain or water.
d.If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation.
e.If the appliance has been dropped or the cabinet has been damaged.
f.When the appliance exhibits a distinct change in performance - this indicates a need for service.
17.When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
18.Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition.
INFORMATION FOR USA
■INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is con- nected.
•Consult the dealer or an experienced radio/TV technician for help.
■CAUTION
CHANGES OR MODIFICATIONS NOT APPROVED BY JVC COULD VOID USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan Limited.is: JVC Technology Centre Europe GmbH
P.O.Box 10 05 52
61145 Friedberg Germany
PRECAUTION
●To save energy, turn the power off when not in use.
●This unit is a special heater for
●Use AC 24 V power supply for TK-C215VP series.
●Do not modify this machine without prior permission. Accidents may occur.
●Refer to the instructions for
●After installing to
●Always use the desiccant that comes with this unit. Other desiccants or the desiccant that comes with
●When the heater board is installed, the switch on the camera unit is hidden and image adjust- ment cannot be made. Always adjust the image quality before installing the heater.
●Do not use the heater unit in the following locations:
•Locations where the surrounding temperature exceeds
•Locations where corrosive gas occurs.
•Vibrating locations
●Do not touch this unit during operation or after operation as its temperature is high. It may cause a burn.
Contents
Instructions | Warranty Card | Service Information Card | Desiccant | HEATER UNIT | |
1 | 1 | 1 | (Service Parts | ||
1 | |||||
|
|
| |||
|
|
|
| ||
|
|
| 1 |
|
Installation Method
Mount this unit onto
FOR USA AND CANADA
CAUTION
The lightning flash wish arrowhead symbol, within an equilateral triangle isintended to alert the user to the presence of uninsulated "dangerous voltage" within
Step1: Disassembling TK-C215VP series
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
the product's enclosure thatmay be of
sufficient magnitude to constitute a risk of electric shock to persons.
Switch off the power supply of the camera.
1. Removing the dome cover
Wrench (Supplied)
SHOCK. DO NOT REMOVE COVER (OR BACK). NO
The exclamation point within an
equilateral triangle is intended to alert theuser to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Remove the dome cover by unfastening the 3 fastening screws using the wrench supplied.
Memo | Fall Prevention |
| Wire |
●The dome cover and base are connected with fall prevention wire.
Due to design modifications, data given in this instruction book are subject to possible change without prior notice.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
AVERTISSEMENT:
POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, NE PAS EXPOSER L'APPAREIL A L'HUMIDITE OU A LA PLUIE.
INFORMATION (FOR CANADA) RENSEIGNEMENT (POUR CANADA)
This Class B digital apparatus complies with Canadian
Cet appareil numerique de la Classe B est conforme a la norme
2.Removing the inner dome
The inner dome is fastened using lugs at 3 different positions. Grasp the inner dome and remove it from the lugs.
Note
●Before touching the camera unit, make sure to touch the metal surface of the [MONITOR] terminal to discharge any static electricity from your body. Static electricity may cause the camera to mal- function.
Inner
Dome
Lug(x 3)
*