JVC KD-A305/KD-R300 manual 31

	Symptoms	Remedies/Causes
	• Noise is generated.	Skip to another track or change the disc. (Do not add the
		extension code <.mp3> or <.wma> to non-MP3 or
		WMA tracks.)
playback	• A longer readout time is required	Do not use too many hierarchical levels and folders.
	(“READING” keeps flashing on the display).
MP3/WMA	• Tracks do not play back in the order you	The playback order is determined when the files are
	have intended them to play.	recorded.
	• The elapsed playing time is not correct.	This sometimes occurs during playback. This is caused by
		how the tracks are recorded on the disc.
	• The correct characters are not displayed	This unit can only display letters (upper case), numbers,
	(e.g. album name).	and a limited number of symbols.
	• Bluetooth device does not detect the unit.	The unit can be connected with one Bluetooth cellular
		phone and one Bluetooth audio device at a time.
		While connecting a device, this unit cannot be detected
		from another device. Disconnect currently connected
		device and search again.
	• The unit does not detect the Bluetooth	• Check the Bluetooth setting of the device.
	device.	• Search from the Bluetooth device. After the device
		detects the unit, select “OPEN” on the unit to connect
Bluetooth*		the device. (See page 11.)
	• The unit does not make pairing with the	• Enter the same PIN code for both the unit and target
	Bluetooth device.	device.
		• Select the device name from “SPECIAL,” then try to
		connect again. (See page 11.)
		• Try to pair/connect from the Bluetooth device.
	• Echo or noise occurs.	Adjust the microphone unit position.
	• Phone sound quality is poor.	• Reduce the distance between the unit and the
		Bluetooth cellular phone.
		• Move the car to a place where you can get a better
		signal reception.

*For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.

Continued on the next page

ENGLISH

REFERENCES 31