ENGLISH

You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See “Auto Cnnct” on page 49.)

Disconnecting a device

Perform steps 1 and 2 on page 26, then...

Select “Discn Phone” or “Discn Audio.”

“Disconnecting...” flashes, then “Disconnected (and device name)” appears on the display when the device is disconnected.

Using the Bluetooth cellular phone

Making a call

You can make hands-free calls using the unit.

The built-in microphone is behind this corner of the unit.

The sounds comes out from the connected speakers.

•When appears on the display, you can move back to the previous display by pressing number button 3.

1

2Select “Call.”

3Select the method to make a call.

•Dialed*: Shows the list of the phone numbers you have dialed. Go to the following step.

•Received*: Shows the list of the received calls. Go to the following step.

•Phonebook: Shows the name/phone number of the phone book of the unit. Go to the following step. To copy the phone book memory, see page 30.

•Preset: Shows the list of preset numbers. Go to the following step. To preset numbers, see page 30.

•Dial Number: Shows the phone number entry screen. See “How to enter phone number” on page 29.

•Voice Dial (Only accessible when the connected cellular phone has the voice recognition system): Speak the name (registered words) you want to call.

*Displays only when the dialed or received number is made through the unit.

4Select the name/phone number/preset number you want to call.

•When the sound is stopped or interrupted during the use of a Bluetooth device, turn off, then turn on the unit.

–If the sound is not yet restored, connect the device again. (See “Connecting a registered device” on page 27.)

28