ENGLISH
General settings—PSM
•“Auto” setting for “Dimmer” may not work correctly on some vehicles, particularly on those having a control dial for dimming.
In this case, change the “Dimmer” setting to any other than “Auto.”
•If “LCD Type” is set to “Auto,” the display pattern will change to the “Positive” or “Negative” pattern depending on the “Dimmer” setting.
•If you change the “Amp Gain” setting from
“High PWR” to “Low PWR” while the volume level is set higher than “Volume 30,” the unit automatically changes the volume level to “Volume 30.”
Disc setup menu
•When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming.
•When you select “16:9” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.
•Even if “4:3 PAN SCAN” is selected, the screen size may become “4:3 LETTERBOX” for some discs.
About sounds reproduced through the rear terminals
•Through the analog terminals (Speaker out/ LINE OUT):
•Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this terminal. (For more details, see table on page 58.)
To reproduce
•About Dual Zone:
Through the 2nd AUDIO OUT,
On-screen guide icons
During playback, the following guide icons may appear for a while on the monitor. 
: Playback
: Pause
:
: Forward search : Reverse search
DVD: The following icons appear at the beginning of a scene containing: 
:
:
56