20
Operations using the on-screen bar
(DVD/DVD-VR/DivX/MPEG Video/VCD)
These operations are possible on the monitor using the
remote controller.
1 Show the on-screen bar (see page 21).
2 Select an item.
3 Make a selection.
If pop-up menu appears...
• To cancel pop-up menu, press RETURN.
• For entering time/numbers, see the following.

Entering time/numbers

Press % / to change the number, then press @ / # to
move to the next entry.
• Each time you press % / , the number increases/
decreases by one value.
• After entering the numbers, press ENT (enter).
• It is not required to enter the zero and tailing zeros
(the last two digits in the example below).
Ex.: Time search
DVD: _:_ _:_ _ (Ex.: 1:02:00)
Press % once, then # twice to go to the third entry, %
twice, then press ENT (enter).

To remove the on-screen bar

(twice)

Using menu driven features... (DVD-Video/

DVD-VR)

1 Press TOP M/MENU to enter the menu screen.
2 Press % / / @ * / # * to select an item you want
to start play.
3 Press ENT (enter) to confirm.
* Not applicable for DVD-VR.

Canceling the PBC playback... (VCD)

1 During stop, press DIRECT while holding SHIFT.
2 Hold SHIFT, then press the number buttons (0 – 9)
to enter the desired number.
3 Press ENT (enter) to confirm.
• To resume PBC, press TOP M/MENU.
EN18-25_KD-DV7406_005A_f.indd 20EN18-25_KD-DV7406_005A_f.indd 20 2/12/08 2:02:18 PM2/12/08 2:02:18 PM