JVC KD-DV7405, KD-DV7406 4, 1 2 3 4, 5, 6

39SETTINGS

• 55Hz: Frequencies higher than 55 Hz

are cut off.

• 85Hz: Frequencies higher than 85 Hz

are cut off.

• 120Hz: Frequencies higher than 120 Hz

are cut off.

3 Turn the control dial to adjust the

subwoofer output level. [0 to 8]

4 Press number button 1 ( ) to

move to another setting level.

4 /¢ : select the quality of

LPF. [–12dB/oct or –24dB/oct]

Control dial: Turn the control dial to select

the subwoofer phase. [0deg (normal) or

180deg (reverse)]

* If “Off” is selected in step 2, you can only

adjust the subwoofer phase.

C Hi Pass (Hi Pass Filter)

Turn the control dial to select the cutoff

frequency to the front/rear speakers. Set this

to match the LPF setting.

• Off: All signals are sent to the front/rear

speakers.

• 62Hz: Frequencies lower than 62 Hz are

cut off.

• 95Hz: Frequencies lower than 95 Hz are

cut off.

• 135Hz: Frequencies lower than 135 Hz are

cut off.

D VolAdjust, [–5 to +5]

Turn the control dial to adjust the input level

of each source (except FM).

Adjust to match the input level of the FM

sound level.

• Before making an adjustment, select the

source you want to adjust.

E Loudness, [Off or On]

Turn the control dial to select “Off” or

“On.” When “On” is selected, low and high

frequencies sound are boosted to produce a

well-balanced sound at low volume level.

4 Exit from the setting.

Storing your own sound modes

You can adjust the sound modes and store your own

adjustments in memory.

• When is shown on the display, you can

move back to the previous screen by pressing number

button 6.

1

2 Select a sound mode.

3 Select a frequency range to adjust.

4 Adjust the sound elements of the selected

frequency range.

1 Press 4 /¢ to select the

frequency band, then press 5 / ∞ to

enhanced level for the selected frequency

band. [–6 to +6]

2 Press number button 5 ( ), then turn

the control dial to select the frequency.

3 Press number button 5 ( ), then turn

the control dial to select the quality slope (Q).

5 Repeat steps 3 and 4 to adjust the other

frequency bands.

6 Store the adjustments.

EN32-39_KD-DV7406_005A_f.indd 39EN32-39_KD-DV7406_005A_f.indd 39 2/12/08 2:03:51 PM2/12/08 2:03:51 PM

Contents

Main Page IMPORTANT FOR LASER PRODUCTS For safety... Temperature inside the car... How to reset your unit How to forcibly eject a disc Caution on volume setting: Caution for DualDisc playback WARNINGS: (To prevent accidents and damage) Page CONTENTS Disc type Recording format, file type, etc Playable Playable disc type 7INTRODUCTIONS Preparation Cancel the display demonstration and set the clock 1 2 3 4 Basic operations Using the control panel 9OPERATIONS Installing the battery Using the remote controller (RM-RK252) IMPORTANT: Page 11OPERATIONS FM station automatic presetting SSM (Strong-station Sequential Memory) 1 2 3 When an FM stereo broadcast is hard to receive 3 Listening to the radio 1 2 3 Page Disc operations 1 2 3 15OPERATIONS Operations using the control panel Disc type 17OPERATIONS 5 Selecting a folder/track on the list (only for MP3/WMA/WAV file) 2 3 4 Operations using the remote controller (RM-RK252) 19OPERATIONS Operations using the on-screen bar 1 2 3 To remove the on-screen bar Entering time/numbers Using menu driven features... (DVD-Video/ DVD-VR) 21OPERATIONS On-screen bar To select a playback mode Operations using the control 1 2 3 4 Control screen Operations using the list List screen (DivX/MPEG Video/MP3/WMA/ WAV) 1 2 3 To stop play and detach the USB device Listening to the USB device 25OPERATIONS Dual Zone operations 1 2 3 Listening to the Bluetooth devices Registering a Bluetooth device Registration (Pairing) methods Registering using Open 2 3 4 5 2 3 Connecting/disconnecting/deleting a registered device 2 3 4 1 2 3 When a call comes in.... When a text message comes in.... Making a call 1 2 3 4 5 How to enter phone number 2 3 Using the Bluetooth audio player Select BT-AUDIO. Using voice command 1 2 Presetting the phone number Listening to the CD changer 1 2 To select a disc/folder/track on the list Listening to the iPod When connecting with the USB cable Selecting a track from the menu 1 2 3 Menu items: Operations using the control screen 1 2 To select a track from Search Mode Search modes category: To select a playback mode/change the speed of the Audiobooks Selecting a track from the menu Selecting the playback modes When connecting with the interface adapter Listening to the other external components 1 2 3 4 Page Adjusting the sound 1 2 3 Selecting a preset sound mode 1 2 3 Preset value setting for each sound mode 4 39SETTINGS Storing your own sound modes 1 2 3 4 5 General settings PSM 41SETTINGS Page 43SETTINGS Changing the display color Setting the display color 2 3 Setting the time for dimmer 2 3 4 2 3 4 5 6 4 5 Disc setup menu 1 2 3 4 Menu Item Setting 47SETTINGS Bluetooth settings 2 3 4 5 48 SETTINGS 1 2 3 Title assignment 49REFERENCES How to clean the connectors Moisture condensation How to handle discs Maintenance More about this unit Disc operations Inserting a disc Ejecting a disc Playing Recordable/Rewritable discs USB operations Icons for phone types Warning messages for Bluetooth operations Bluetooth operations 53REFERENCES Title assignment iPod About sounds reproduced through the rear terminals General settingsPSM Disc setup menu Adjustable sound elements 55REFERENCES On-screen guide icons Output signals through the DIGITAL OUT terminal Playback Disc Output Signal 57REFERENCES Language codes Troubleshooting 59REFERENCES Page 61REFERENCES Specifications 63REFERENCES