How to read this manual
•Button operations are mainly explained with the illustrations in the table below.
•
is used to indicate an indicator is displayed for the correspnding operation.
•Some related tips and notes are explained in “More about this unit” (see pages 14 and 15).
Press briefly.
Press repeatedly.
Press either one.
Press and hold until your desired response begins.
Press and hold both buttons at the same time.
How to use the M MODE button
If you press M MODE, the unit goes into functions mode, then the number buttons work as different function buttons.
Ex.: When number button 2 works as MO (monaural) button.
CONTENTS
|
|
| ENGLISH | |
Control panel — | 4 | |||
| ||||
Getting started | 5 |
| ||
Basic operations | 5 |
| ||
Radio operations | 6 |
| ||
FM RDS operations | 7 |
| ||
Searching for your favorite FM RDS programme ... | 7 |
| ||
Disc operations | 9 |
| ||
Playing a disc in the unit | 9 |
| ||
Sound adjustments | 10 |
| ||
General settings — PSM | 11 |
| ||
Maintenance | 13 |
| ||
More about this unit | 14 |
| ||
Troubleshooting | 16 |
| ||
Specifications | 17 |
| ||
Caution on volume setting:
Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
Time countdown indicator
To use these buttons for their original
functions again after pressing M MODE, wait for 5 seconds without pressing any of these buttons until the functions mode is cleared or press M MODE again.
For safety...
•Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.
•Stop the car before performing any complicated operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.
3
