JVC KD-G161 Types, Using the standby receptions, TA Standby Reception, PTY Standby Reception

	! Start searching for your favorite
ENGLISH	programme.
	If there is a station
	broadcasting a programme
	of the same PTY code as you
	have selected, that station is
	tuned in.

Storing your favorite programme

types

You can store six favorite programme types.

Preset programme types in the number buttons (1 to 6):

1Select a PTY code (see page 7).

2Select the preset number (1 – 6) you want to store into.

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM.

The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 12).

To activate TA Standby Reception

The TP (Traffic Programme) indicator either lights up or flashes.

•If the TP indicator lights up, TA Standby Reception is activated.

•If the TP indicator flashes, TA Standby Reception is not yet activated. (This occurs when you are listening to an FM station without the RDS signals required for TA Standby Reception.)

To activate TA Standby Reception, tune in to another station providing these signals. The TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

Ex.: When “ROCK M” is selected

3Repeat steps 1 and 2 to store other PTY codes into other preset numbers.

4Finish the procedure.

PTY Standby Reception

PTY Standby Reception allows the unit to switch temporarily to your favorite PTY programme from any source other than AM.

To activate and select your favorite PTY code

for PTY Standby Reception, see page 12. The PTY indicator either lights up or flashes.

•If the PTY indicator lights up, PTY Standby Reception is activated.

•If the PTY indicator flashes, PTY Standby Reception is not yet activated.

To activate PTY Standby Reception, tune in to another station providing these signals. The PTY indicator will stop flashing and remain lit.

To deactivate the PTY Standby Reception,

select “OFF” for the PTY code (see page 12). The PTY indicator goes off.

8