General settings—PSM
Enter PSM menu. | Select an item. | Adjust. | Finish |
| Indication | Item ( : Initial) | Setting | |||||
|
|
|
|
|
|
|
|
| DEMO | • | DEMO ON | : | The display demonstration will be activated automatically if no operation is | |||
|
|
|
|
|
|
| done for about 20 seconds. |
|
| • | DEMO OFF | : | Cancels. | ||
| CLK DISP*1 | • | ON | : | The clock time is shown on the display at all times when the power is turned | |||
|
| • | OFF |
| off. | ||
|
|
|
|
|
| : | Cancels; pressing DISP will show the clock time for about 5 seconds when the |
|
|
|
|
|
|
| power is turned off. |
| CLOCK H (Hour) | 1 – 12 | : | [Initial: 1 (1:00)] | ||||
| CLOCK M (Minute) | 00 – 59 | : | [Initial: 00 (1:00)] | ||||
| DIMMER | • | ON | : | Dims the display and button illumination. | |||
|
| • | OFF | : | Cancels. | ||
| SCROLL | • | ONCE | : | Scrolls the displayed information once. | |||
|
| • | AUTO | : | Repeats scrolling (at | ||
|
| • | OFF | : | Cancels. | ||
|
|
|
|
|
| • | Pressing DISP for more than one second can scroll the display regardless of |
|
|
|
|
|
|
| the setting. |
| L/O MODE | • | REAR | : | Select if the REAR LINE OUT terminals are used for connecting the speakers | |||
|
|
|
|
|
|
| (through an external amplifier). |
|
| • | WOOFER | : | Select if the REAR LINE OUT terminals are used for connecting a subwoofer. | ||
| WOOFER*2 | • | LOW | : | Frequencies lower than 90 Hz are sent to the subwoofer. | |||
|
| • | MID | : | Frequencies lower than 135 Hz are sent to the subwoofer. | ||
|
| • | HIGH | : | Frequencies lower than 180 Hz are sent to the subwoofer. | ||
| AUX ADJ | A.ADJ 00 | : | Adjust the auxiliary input level to avoid the sudden increase of the output | ||||
|
| – A.ADJ 05 |
| level when changing the source from external component connected to the | |||
|
|
|
|
|
|
| AUX input jack on the control panel. |
| TAG DISP | • | TAG ON | : Shows the tag while playing MP3/WMA tracks. | ||||
| (for | • | TAG OFF | : | Cancels. | |||
| AMP GAIN*3 | • | LOW PWR | : VOL 00 – VOL 30 (Select if the maximum power of each speaker is less than | ||||
|
|
|
|
|
|
| 50 W to prevent the speaker from being damaged.) |
|
| • | HIGH PWR | : VOL 00 – VOL 50 | |||
| AREA | • | AREA US | : | When using in North/Central/South America. AM/FM intervals are set to | |||
|
|
|
|
|
|
| 10 kHz/200 kHz. |
|
| • | AREA EU | : When using in any other areas. AM/FM intervals are set to 9 kHz/50 kHz | |||
|
|
|
|
|
|
| (100 kHz during auto search). |
|
| • | AREA SA | : | When using in South American countries. AM/FM intervals are set to 10 kHz/ | ||
|
|
|
|
|
|
| 100kHz. |
*1 | If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select “OFF” to | ||||||
| save the car’s battery. |
|
|
|
|
| |
*2 | Displayed only when “L/O MODE” is set to “WOOFER.” | ||||||
*3 | The volume level automatically changes to “VOL 30” if you change to “LOW PWR” while the volume level is set higher than | ||||||
| “VOL 30.” |
|
|
|
|
|
|
TROUBLESHOOTING
| Symptoms | Remedies/Causes | |
| • Sound cannot be heard from the speakers. | • Adjust the volume to the optimum level. | |
| General |
| • Check the cords and connections. | |
|
| ||
• The buttons on the unit do not work as you | If you press M MODE, some buttons work differently from it | ||
| |||
| intended. | original function. Wait for 5 seconds or press M MODE again. | |
|
|
| |
| • This unit does not work at all. | Reset the unit. | |
|
|
| |
| FM/AM | • SSM automatic presetting does not work. | Store stations manually. | |
|
| ||
| • Static noise while listening to the radio. | Connect the antenna firmly. | ||
| |||
|
|
| |
| • Disc ejects. | Insert the disc correctly. | |
|
|
| |
| • | • Insert a finalized | |
| • Tracks on the | • Finalize the | |
| skipped. | for recording. | |
playback |
|
| |
• Disc can be neither played back nor ejected. | • Unlock the disc. | ||
| |||
|
| • Eject the disc forcibly. | |
| Disc |
|
| |
| • Disc sound is sometimes interrupted. | • Stop playback while driving on rough roads. | ||
| |||
|
| • Change the disc. | |
|
| • Check the cords and connections. | |
|
|
| |
| • “NO DISC” appears on the display. | Insert a playable disc into the loading slot. |
| • Disc cannot be played back. | • Use a disc with MP3/WMA tracks recorded in a format compliant | ||
|
|
| with ISO 9660 Level 1, Level 2, Romeo, or Joliet. | |
G240)- |
|
| • Add the extension code <.mp3> or <.wma> to the file names. | |
|
|
| ||
• | Noise is generated. | Skip to another track or change the disc. (Do not add the extension | ||
| ||||
| (for KD |
|
| code <.mp3> or <.wma> to | |
|
|
| ||
• | A longer readout time is required | Do not use too many hierarchical levels and folders. | ||
playback | • | Tracks are not played back in the order you | Playback order is determined when the files are recorded. | |
|
| (“READING” keeps flashing on the display). |
| |
MP3/WMA |
| have intended. |
| |
|
|
| ||
|
|
| ||
| • The elapsed playing time is not correct. | This sometimes occurs during playback. This is caused by how the | ||
|
|
| tracks are recorded on the disc. | |
|
|
| ||
| • The correct characters are not displayed | This unit can only display alphabets (upper case), numbers, and a | ||
|
| (e.g. album name). | limited number of symbols. | |
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
INSTRUCTIONS
SPECIFICATIONS
Audio amplifier section
Tuner section
CD player section |
| General |
|
| Load Impedance: | 4 Ω (4 Ω to 8 Ω allowance) | |
| Tone Control Range: | Bass: | ±12 dB at 60 Hz |
| ||
| Treble: | ±12 dB at 7.5 kHz |
| Frequency Response: | 40 Hz to 20 000 Hz | |
2.5 V/20 kΩ load (full scale) | ||
| Output Impedance: | 1 kΩ |
|
| ||
| 2.5 V/20 kΩ load (full scale) | |
If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)Alternate Channel Selectivity (400 kHz): 65 dBFrequency Response: 40 Hz to 15 000 HzStereo Separation: 35 dB[AM Tuner]
Sensitivity/Selectivity: 20 μV/35 dB| Type: | Compact disc player |
Signal Detection System: | |
| (semiconductor laser) |
| Number of channels: | 2 channels (stereo) |
| Frequency Response: | 5 Hz to 20 000 Hz |
| Dynamic Range: | 93 dB |
| 98 dB | |
| Wow and Flutter: | Less than measurable limit |
| MP3 Decoding Format (for | |
| MPEG1/2 Audio Layer 3 |
| Max. Bit Rate: 320 kbps |
WMA (Windows Media® Audio) Decoding Format | |
| (for | Max. Bit Rate: 192 kbps |
Please reset your unit
Still having trouble??Call| Power Requirement: | Operating Voltage: DC 14.4 V |
| (11 V to 16 V allowance) |
| Grounding System: | Negative ground |
182 mm × 52 mm × 160 mm
188 mm × 58 mm × 5 mm
PREPARATION
This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
Prepare this before installation
WARNINGS
To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit.
• Be sure to ground this unit to the car’s chassis again after installation.Notes:•Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio dealer.
•It is recommended to connect to the speakers with maximum power of more than 50 W (both at the rear and at the front, with an impedance of 4 Ω to
8 Ω). If the maximum power is less than 50 W, change “AMP GAIN” setting to prevent the speakers from being damaged (see “General
TROUBLESHOOTING
• The fuse blows.* Are the red and black leads connected correctly?•Power cannot be turned on. * Is the yellow lead connected?•No sound from the speakers.* Is the speaker output lead*Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?
• This unit becomes hot.*Is the speaker output lead grounded?
*Are the