Using the remote controller — RM-RK60

This receiver can be remotely controlled as instructed here (with an optionally purchased remote controller). We recommend that you use remote controller RM-RK60 with your receiver.

•When operating, aim the remote controller directly at the remote sensor on the receiver. Make sure there is no obstacle in between.

Installing the lithium coin battery (CR2025)

Warning:

•Store the battery in a place where children cannot reach to avoid risk of accident.

•To prevent the battery from over-heating, cracking, or starting a fire:

–Do not recharge, short, disassemble, or heat the battery or dispose of it in a fire.

–Do not leave the battery with other metallic materials.

–Do not poke the battery with tweezers or similar tools.

–Wrap the battery with tape and insulate when throwing away or saving it.

Caution:

Main elements and features

1 (standby/on attenuator) button

• Turns on and off the power and also attenuates the sound.

2SRC (source) button

• Selects the source.

3R (reverse) / F (forward) buttons

•Searches for stations if pressed briefly.

•Fast-forwards or reverses the track if pressed and held.

•Changes the tracks on the disc.

4SOUND button

•Selects the sound mode (C-EQ: custom equalizer).

5U (up) / D (down) buttons

•U (up): Changes the FM/AM bands.

•D (down): Changes the preset stations.

•Changes the folder on the MP3/WMA discs.

6VOLUME +/– buttons

• Adjusts the volume level.

The receiver is equipped with the steering wheel remote control function.

•See the Installation/Connection Manual (separate volume) for connection.

ENGLISH

23