Canceling the display | Setting the clock |
demonstrations | 1 |
|
If no operations are done for about 20 seconds, display demonstration starts.
[Initial: DEMO
ENGLISH
1
2
3
4Finish the procedure.
To activate the display demonstration
In step 3 above...
2Set the hour, minute, and clock system.
1Select “CLOCK H” (hour), then adjust the hour.
2Select “CLOCK M” (minute), then adjust the minute.
3Select “24H/12H,” then select “24H” (hour) or “12H” (hour).
3Finish the procedure.
To check the current clock time when the power is turned off
7