RADIO OPERATIONS

ENGLISH

Listening to the radio

You can use either automatic searching or manualsearching to tune in to a particular station.
Searching for a station automatically: Auto search
To stop searching before a station isreceived, press the same button you have pressed for searching.

Note:

FM1 and FM2: 87.5 MHz – 108.0 MHz FM3: 65.00 MHz – 74.00 MHz
1 Select the band (FM1 – 3, AM).Each time you press thebutton, the band changes as follows:FM1 FM2 FM3 AMSelected band appears.

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

Searching for a station manually: Manual search

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as follows:

FM1 FM2 FM3 AM

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

Note:

2 Press and hold ¢

or

4

This receiver has three FM bands (FM1, FM2,until “M” (manual) starts flashing on
the display.

 

 

FM3). You can use any one of them to listen to

 

 

an FM broadcast.2 Start searching for a station.To search for stations of higher frequenciesTo search for stations of lower frequenciesWhen a station is received, searching stops.

8