Radio operations

ENGLISH ~

Ÿ

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

!Start searching for a station.

When a station is received, searching stops. To stop searching, press the same button again.

To tune in to a station manually

In step !above...

1

2Select a desired station frequency.

Note:

FM1 and FM2: 87.5 MHz – 108.0 MHz

FM3:

65.00 MHz – 74.00 MHz

When an FM stereo broadcast is hard to receive

Lights up when monaural mode is activated.

Reception improves, but the stereo effect will be lost.

To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting— SSM (Strong-station Sequential Memory)

1Select the FM band (FM1 – FM3) you want to store into.

2

3

“SSM” flashes, then disappears when automatic presetting is over.

Local FM stations with the strongest signals are searched and stored automatically in the FM band.

6