Adjusting the sound
You can adjust the sound characteristics to your preference.
1
2
Indication, [Range]BAS*1 (bass),
Adjust the bass.
MID*1
Adjust the
TRE*1 (treble),
Adjust the treble.
FAD*2 (fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.
LOUD*1 (loudness), [LOUD ON or LOUD OFF] Boost low and high frequencies to produce a well- balanced sound at low volume level.
VOL (volume), [00 to 30 or 50*3]
Adjust the volume.
*1 When you adjust the bass,
*2 If you are using a
*3 Depending on the amplifier gain control setting. (See page 17 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode) items listed in the table that follows.
1
2Select a PSM item.3Adjust the PSM item selected.4Repeat steps 2 and 3 to adjust other PSM items if necessary.
5Finish the procedure.ENGLISH
Continued on the next page
15