JVC KD-HDW10J OFF, LOW, MID, OFF, OFF, OFF, ONCE, AUTO, HIGH, BEEP, AREA, AUTO, WIDE, AUTO, WOOFER, EXT IN, TAG ON, S MODE, MANUAL, CHANGER, TAG OFF, LOW PWR, AREA US

ENGLISH

Indications	Selectable settings, [reference page]
*SCROLL1**	ONCE	: [Initial]; Scrolls the information once.
Scroll mode	AUTO	: Repeats scrolling (5-second intervals in between).
	OFF	: Cancels.
	• Pressing DISP for more than one second can scroll the display regardless
	of the setting.
WOOFER	LOW	: Frequencies lower than 90 Hz are sent to the subwoofer.
Subwoofer cutoff	MID	: [Initial]; Frequencies lower than 135 Hz are sent to the
frequency		subwoofer.
	HIGH	: Frequencies lower than 180 Hz are sent to the subwoofer.
*EXT IN2**	CHANGER	: [Initial]; To use a JVC CD changer, [11], a JVC
External input		compatible satellite (SIRIUS/XM) tuner, [19], an Apple
		iPod or a JVC D. player, [22].
	EXT IN	: To use any other external component than the above, [24].
TAG DISP	TAG ON	: [Initial]; Shows the Tag information while playing MP3/
Tag display		WMA tracks, [13].
	TAG OFF	: Cancels.
BEEP	ON	: [Initial]; Activates the key-touch tone.
Key-touch tone	OFF	: Cancels.
AMP GAIN	You can change the maximum volume level of this unit.
Amplifier gain	LOW PWR	: VOL 00 – VOL 30 (Select this if the maximum power
control		of the speaker is less than 50 W to prevent them from
		damaging the speaker.)
	HIGH PWR	: [Initial]; VOL 00 – VOL 50
	OFF	: Deactivates the built-in amplifier.
AREA	AREA US	: [Initial]; When using the unit in North/Central/South
Tuner channel		America. AM/FM intervals are set to 10 kHz/200 kHz.
interval	AREA SA	: When using the unit in South American countries where
		FM interval is 100 kHz. AM interval is set to 10 kHz.
	AREA EU	: When using the unit in any other areas. AM/FM intervals
		are set to 9 kHz/50 kHz (100 kHz during auto search).
S MODE	You can change radio station search mode operation using the
Radio station	4 /¢ buttons.
search mode	MANUAL	: [Initial]; To search for a station manually—for Manual
		search, [9].
	HD SEEK	: To search for an HD Radio station only—for HD search, [9].
IF BAND	AUTO	: [Initial]; Increases the tuner selectivity to reduce interference
Intermediate		noises between the stations. (Stereo effect will be lost.)
frequency band	WIDE	: Subject to the interference noises from adjacent stations,
		but sound quality will not be degraded. (Stereo effect will
		not be lost.)
CS ON HD	AUTO	: Automatically activates “USER” for the CS-A mode when
CS-A mode standby		the CS-A mode is set to “OFF”, and the unit receiving a
on HD Radio		radio broadcast encoded with CS II.
	OFF	: [Initial]; Cancels.

*1 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *2 Displayed only when one of the following sources is selected—FM, AM, or DISC.