Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.
ENGLISH
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
How to reset your unit•Your preset adjustments will also be erased.
How to forcibly eject a disc•If this does not work, reset your unit.
•Be careful not to drop the disc when it ejects.
How to use the MODE buttonIf you press MODE, the unit goes into functions mode, then the number buttons and 5/∞ buttons work as different function buttons.
Ex.: When number button 2 works as
MO (monaural) button...
Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.
|
|
|
|
| Time countdown indicator |
|
|
|
|
| |
|
|
|
| [European Union only] | To use these buttons for their original |
|
|
|
| ||
|
|
|
|
| functions again after pressing MODE, wait for |
|
|
|
|
| 5 seconds without pressing any of these buttons |
|
|
|
|
| |
|
|
|
|
| until the functions mode is cleared or press |
IMPORTANT FOR LASER PRODUCTS | MODE again. | ||||
| |||||
1.CLASS 1 LASER PRODUCT
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
2