To select the scroll mode-Scroll, LCD Type

ENGLISH

To select the scroll mode—Scroll

You can scroll the disc information if it cannot be displayed at a time.

•	Once:	Scrolls only once.
•	Auto:	Repeats the scroll
		(in 5-second intervals).
•	Off:	Cancels Auto Scroll.

To select the dimmer mode—Dimmer

When you turn on the car head lights, the display automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer mode is activated.

•	Auto:	Activates Auto Dimmer.
•	Off:	Cancels Auto Dimmer.
•	On:	Always dims the display.

Note:

Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.

In this case, set the dimmer mode to “On” or “Off.”

To adjust the display contrast level

—Contrast

You can adjust the display contrast level among 1

(dark) to 10 (bright).

To select the display illumination pattern

—LCD Type

You can select the display illumination patterns according to your preference.

• Auto:	Positive pattern will be selected
	during the day time (while the
	headlights are turned off); on the
	other hand, negative pattern will
	be used during the night time
	(while the headlights are turned
	on.)

•Positive: Positive (normal) pattern of the display.

•Negative: Negative pattern of the display.

To select the font on the display—Font Type

You can change the font types used on the display. Select either “1” or “2” according to your preference.

To change the FM tuner selectivity

—IF Filter

In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.

•Auto: When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be lost.)

•Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost.

To turn on/off the key-touch tone—Beep

You can deactivate the key-touch tone if you do not want it to beep each time you press a button.

• On:	Activates the key-touch tone.
• Off:	Deactivates the key-touch tone.

To select the external component to use

—Ext Input

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component—CD changer or external component

—to use.

•Changer: To use the CD changer.

• Line In:	To use the external component other
	than CD changer.