Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

 

 

SymptomsCausesRemedies

 

 

• Screen suddenly goes off.

There is a time limit for

Finish the operation within

 

 

 

some operations.

the time limit.

 

 

• Sound cannot be heard

The volume level is set to

Adjust it to the optimum

 

 

from the speakers.

the minimum level.

level.

 

 

 

Connections are incorrect.

Check the cords and

 

 

 

 

connections.

General

 

• The receiver does not

The built-in microcomputer

Reset the receiver

 

work at all.

incorrectly due to noise, etc.

(see page 3).

 

 

may have functioned

 

 

• “Connect Error” appears

The control panel is not

Remove the control panel,

 

 

on the display.

attached correctly.

wipe the connector, then

 

 

 

 

attach it again (see page 40).

 

 

• “Push Reset” appears

Something is blocking the

Reset the receiver (see page

 

 

on the display and the

control panel movement.

3). If this does not work,

 

 

control panel movement is

 

check the installation.

 

 

freezed.

 

 

 

 

FM/AM

 

• SSM automatic presetting

Signals are too weak.

Store stations manually.

 

does not work.

 

 

 

 

 

• Static noise while listening

The antenna is not connected

Connect the antenna firmly.

 

 

to the radio.

firmly.

 

 

 

 

 

• The receiver needs some

The built-in shock-proof

 

 

 

 

 

time to start playback the

circuit is working.

 

 

 

 

 

 

 

 

 

 

audio CD.

 

 

 

 

 

 

CD-R/CD-RW cannot be

CD-R/CD-RW is not

• Insert a finalized CD-R/

 

 

played back.

finalized.

CD-RW.

 

 

• Tracks on the CD-R/

 

• Finalize the CD-R/CD-RW

 

 

CD-RW cannot be

 

with the component which

playback

 

skipped.

 

you used for recording.

 

• Disc cannot be ejected.

Disc is locked.

Unlock the disc (see page 16).

 

 

Disc

 

• Disc cannot be recognized

The CD player may have

Eject the disc forcibly

 

(“No Disc,” “Loading

functioned incorrectly.

(see page 2).

 

 

 

 

Error,” or “Eject Error”

 

 

 

 

 

 

flashes).

 

 

 

 

 

 

• Disc sound is sometimes

You are driving on rough

Stop playback while driving

 

 

interrupted.

roads.

on rough roads.

 

 

 

Disc is scratched.

Change the disc.

 

 

 

Connections are incorrect.

Check the cords and

 

 

 

 

connections.

 

 

 

 

 

 

 

ENGLISH

To be continued....

45