ENGLISH

To turn on/off the power amplifier switch

You can switch off the built-in amplifier and send the audio signals only to the external amplifier(s) to get clear sounds and to prevent internal heat buildup inside this unit. When shipped from the factory, the power amplifier switch is turned on so that the built-in amplifier works.

P. AMP ON:

Select this mode when not using external amplifier(s).

P. AMP OFF:

Select this mode when using external amplifier(s).

To select the scroll mode

You can select the scroll mode for the disc information if it consists of more than 10 characters. When shipped from the factory, Auto Scroll mode is set to “ONCE.”

ONCE:

Scrolls only once.

AUTO:

Repeats the scroll (5-second intervals in between).

OFF:

Cancels Auto Scroll.

Note:

Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP for more than 1 second.

To change the AM/FM channel intervals

When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and 200 kHz for FM (AREA US settings).

You will have to change the channel intervals when using this unit in an area other than North America and South America.

AREA EU: Select this when using this unit in an area other than North and South America. (9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM)

AREA US: Select this when using this unit in North or South America. (10 kHz for AM and 200 kHz for FM)

26

Page 26
Image 26
JVC KD-LX1 To turn on/off the power amplifier switch, To select the scroll mode, To change the AM/FM channel intervals