ENGLISH

Tuning into a preset station

You can easily tune into a preset station.

Remember that you must store stations first. If you have not stored them yet, see pages 8 and 9.

2 1- 2 1- 1

2

1

1

2

 

 

Select the band.

1Press SOURCE (ATT) to select AM or FM as the source.

2 If necessary, press and hold MODE BAND to select the FM band number (FM1, FM2 or FM3).

2

Select the number (1 – 6) for the preset station you want.

If the sound quality decreases and the stereo effect is lost while listening to an FM station

In some areas, adjacent stations may interfere with each other. If this interference occurs, this unit can automatically reduce this interference noise (the initial setting when shipped from the factory). However, in this case, the sound quality will be degraded and the stereo effect will be also lost.

If you do not want to degrade the sound quality and to lose the stereo effect, rather than eliminate the interference noise, see “To change the FM tuner selectivity” on page 33.

10