ENGLISH

Category

Menu items

Selectable settings, [reference page]

 

 

 

 

 

 

 

 

MONO*3

MONO ON

: Activate monaural mode to improve FM reception, but stereo

 

 

Monaural mode

 

 

 

effect will be lost, [8].

 

 

 

MONO OFF

:

Restore the stereo effect.

 

TUNER

 

 

 

 

 

 

IF BAND

AUTO

: Increases the tuner selectivity to reduce interference noises

 

 

 

 

Intermediate

 

 

 

between adjacent stations. (Stereo effect may be lost.)

 

 

frequency band

WIDE

: Subject to interference noises from adjacent stations, but

 

 

 

 

 

 

sound quality will not be degraded and the stereo effect will

 

 

 

 

 

 

remain.

 

 

 

 

 

 

 

FADER*4

R06 – F06

: Adjust the front and rear speaker output balance.

 

 

Fader

 

 

 

[Initial: 00]

 

 

 

 

 

 

 

BALANCE

L06 – R06

: Adjust the left and right speaker output balance.

 

 

Balance

 

 

 

[Initial: 00]

 

 

LOUD

LOUD OFF

:

Cancels.

 

 

Loudness

LOUD ON

: Boost low and high frequencies to produce a well-balanced

 

 

 

 

 

 

sound at a low volume level.

 

 

 

 

 

 

 

AUDIO

AUX ADJUST

AUX ADJ 00

:

Adjust the auxiliary input level to avoid the sudden increase

 

Auxiliary input

— AUX ADJ 05

 

of the output level when changing the source to external

 

 

 

 

 

level adjustment

 

 

 

component connected to the AUX input jack on the control

 

 

 

 

 

 

panel.

 

 

 

 

 

 

 

 

BEEP

BEEP OFF

: Deactivates the keypress tone.

 

 

Keypress tone

BEEP ON

: Activates the keypress tone.

 

 

 

 

 

 

 

 

AMP GAIN*5

LOW POWER

: VOLUME 00 – VOLUME 30 (Select if the maximum power

 

 

Amplifier gain

 

 

 

of each speaker is less than 50 W to prevent damaging the

 

 

control

 

 

 

speaker.)

 

 

 

HIGH POWER

: VOLUME 00 – VOLUME 50

 

 

 

 

 

 

 

 

SELECT

AM*6

AM OFF

:

Disable “AM” in source selection.

 

AM station

AM ON

: Enable “AM” in source selection, [4].

 

 

 

 

 

 

 

 

 

 

SRC

AUX IN*7

AUX OFF

:

Disable “AUX IN” in source selection.

 

Auxiliary input

AUX ON

:

Enable “AUX IN” in source selection, [4].

 

 

*3

Displayed only when the source is “FM.”

 

 

*4

If you are using a two-speaker system, set the fader level to “00.”

*5

The volume level automatically changes to “VOLUME 30” if you change to “LOW POWER” with the volume level

 

set higher than “VOLUME 30.”

 

 

 

*6

Displayed only when any source other than “AM” is selected.

*7

Displayed only when any source other than “AUX IN” is selected.

14SETTINGS

Page 14
Image 14
JVC KD-R205 manual Effect will be lost, Restore the stereo effect, Remain, Fader Initial, Balance Initial, Loudness, Panel