INSTALLATION

If you are not sure how to install this unit correctly, consult your JVC car audio dealer.

In dash-mounting

When you stand the unit, be careful

not to damage the fuse on the rear.

Do the required electrical connections.

Removing the unit

Before removing the unit, release the rear section.

Bend the appropriate tabs to hold the sleeve firmly in place.

When using the optional stay

Fire wall

Stay (option)

Dashboard

Screw (option)

Install the unit at an angle of less than 30˚.

When installing the unit without using the sleeve

In a Toyota car for example, first remove the car radio and install the unit in its place.

Flat type screws

* Not supplied for this unit.

—M5 ⋅ 8 mm (M5 ⋅ 3/8")*

 

Bracket*

 

 

Flat type screws

Pocket

—M5 ⋅ 8 mm (M5 ⋅ 3/8")*

 

Bracket*

 

INSTALLATION / CONNECTION

ELECTRICAL CONNECTIONS

Make sure to disconnect the battery’s negative terminal.

• Be sure to ground this unit to the car’s chassis again after installation.

High

Note:

It is recommended to connect to the speakers with maximum power of more than 45 W (both at the rear and at the front, with an impedance of 4 Ω to 8 Ω). If the maximum power is less than 45 W, change “AMP GAIN” setting to prevent the speakers from being damaged (see “General settings—PSM”).

Heat sink

Typical connections

Rear ground terminal

Line out

Connecting the external amplifier or subwoofer

Remote lead

Y-connector *1

Antenna terminal

Connect only the front speakers if your speaker system is two-speaker system.

White with black stripe

Front speaker (left)

White

 

 

 

 

 

 

 

15 A fuse

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Black

To metallic body or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

chassis of the car

To a live terminal in the

Yellow *2 fuse block connecting to the car battery (bypassing the

ignition switch) (constant 12 V)

Ignition switch

Fuse block

Set “L/O MODE” to “REAR”

(See “General settings—PSM.”)

You can connect a power amplifier for rear speakers.

JVC Amplifier

Rear speakers

Remote lead (blue with white stripe)

To the remote lead of other equipment or automatic antenna if any

Front speakers

Gray with black stripe

Front speaker (right)

Gray

Red

To an accessory terminal in

 

the fuse block

Set “L/O MODE” to “WOOFER” (See “General settings—PSM.”)

You can also connect a subwoofer to the REAR LINE OUT terminals.

Green with black stripe

Rear speaker (left)

Green

Purple with black stripe

Blue with white

stripeTo the remote lead of other equipment or automatic antenna if

any (200 mA max.)

JVC Amplifier

Subwoofer

Rear speaker (right)

Purple

PRECAUTIONS on power supply and speaker connections

*1 Not supplied for this unit.

*2 Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on.

*3 Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit.

*4 Signal cord (not supplied for this unit)

4 – EN

Page 3
Page 4
Image 4
JVC KD-S13, KDS23 Precautions on power supply and speaker connections, Set L/O Mode to Rear See General settings-PSM
Page 3

KD-S13, KDS23 specifications

The JVC KD-S23 and KD-S13 are compact yet powerful car stereo receivers designed to enhance the audio experience for all types of music enthusiasts. Both models share a sleek design and feature-rich functionality, making them suitable for various vehicles.

One of the standout characteristics of the JVC KD-S23 and KD-S13 is their compatibility with a wide range of audio sources. They support CD playback, MP3, WMA, and even have auxiliary inputs for connecting external devices. This means users can enjoy their favorite tunes from multiple sources without any hassle. Additionally, both models support USB connections, allowing users to play music directly from flash drives, which is increasingly popular in the digital age.

The sound quality produced by these receivers is notable. With a high power output and multiple preset equalizer settings, users can tailor their audio experience to their preference. The built-in Dynamic Bass Boost technology further enhances low frequencies, providing a more immersive listening experience. This feature is particularly beneficial for bass-heavy music genres, allowing users to feel the rhythm while driving.

Another key feature is the AM/FM tuner with RDS capabilities. This allows users to search for radio stations quickly and easily by simply entering a keyword. The RDS functionality offers real-time information such as song titles and artist names, enhancing the radio listening experience.

Both the KD-S23 and KD-S13 come with a clear and easy-to-read LCD display, which provides essential information at a glance. The display is designed for visibility in various lighting conditions, ensuring users can read track information and settings without distractions while on the road.

In terms of expandability, both models allow for additional speaker connections, and they are compatible with various aftermarket amplifiers. This makes them an excellent choice for users looking to upgrade their car’s audio system.

Overall, the JVC KD-S23 and KD-S13 car stereo receivers deliver an impressive mix of functionality, sound quality, and user-friendly features. With their robust support for multiple media formats and technologies, they are ideal companions for anyone seeking to elevate their in-car audio experience. These models combine convenience with high-performance audio, making them a smart choice for car audio enthusiasts.
Top Page Image Contents