Furuno 1834C-BB, GD-1920C-BB Selecting a Display, Display modes, Panel brilliance setting window

1. OPERATIONAL OVERVIEW

4.Press the B: PANEL BRILL soft key to show the panel brilliance window. The bar graph shows current panel brilliance setting.

PANEL BRILLIANCE

8

Panel brilliance setting window

5.Adjust the ENTER knob, clockwise to raise the brilliance or counterclockwise to lower it.

6.Hit the E: RETURN soft key to finish.

1.5Selecting a Display

1.5.1Display modes

If you have a radar, navigator, network sounder and external video source (video recorder, etc., optional PIP board required) six full-screen displays are available: radar, plotter, echo sounder, nav data, overlay, and external video. In addition to the full-screen display, you can divide the screen into halves and thirds to show two and three sets of images on a combination display.

Full screen

(radar)

Combination screen (radar + plotter)

Overlay screen (plotter + radar only, Requires L/L data)

Display screens

The table below shows the displays available with each screen type. Screen type and available display screen

Full screen	Combination screen options	Overlay screen
	(half- or thirds-screen)	options
Plotter, radar, sounder,	Plotter, radar, sounder,	Radar + plotter
nav data, external	compass (or wind), highway,
video, overlay	compass (or wind)/highway,
	nav data, overlay, external
	video

1-6