Furuno 1934C-BB manual Restarting navigation, Example of when to restart navigation, Log display

3. PLOTTER OPERATION

Restarting navigation

When you steer to avoid an obstacle or the vessel drifts, you may go off your intended course, as in Line 1 in the figure below. Also, if you don’t need to return to the original course, you can go directly to the next waypoint, as in Line 2 in the figure below. In these cases, use the restart navigation function to restart navigation.

Line 2

Obstacle Line 1

Original course

Example of when to restart navigation

1.Press the MENU key to open the menu.

2.Press the C: WAYPOINTS/ROUTES soft key.

3.Press the C: LOG soft key.

TO Waypoint (WPT name in reverse video)

Passed waypoint (gray characters)

Estimated Time of Arrival at destination

Replaces triangle when selecting a route leg.

ETA 23:59 30. APR

0148°18.290'N 007WPT 123°14.286'W

0248°17.341'N

02

▲	123°10.232'W
005WPT

0348°20.261'N 003WPT 123°11.658'W

0448°19.862'N 006WPT 123°04.190'W

LEG

90.0°

2.86nm

322.6°

3.08nm

75.2°

4.99nm

152.5°

19.87nm

LOG

ARE-

START

B STOP

C RVRSE

D SPEED

ECOORDTYPE

Replaced by

"FOLLOW LEG" when selecting a route leg.

Log display

4.Use the Trackball to select a waypoint or a route leg. When a route leg is selected the single arrow cursor is replaced by double arrows.

5.Press the A: RESTART soft key or A: FOLLOW LEG soft key in case of route leg.

RESTART: Line 2 in the figure shown above

FOLLOW LEG: Line 1 in the figure shown above

6.Press the MENU key to close the menu.

3-44