Furuno 1834C-BB Removing waypoints from a route, Inserting a waypoint from the plotter display

3. PLOTTER OPERATION

Inserting a waypoint from the plotter display

Inserting a waypoint before first waypoint or after last waypoint in a route

1.Press the MENU key to open the menu.

2.Press the C: WAYPOINTS/ROUTES soft key.

3.Press the B: ROUTES soft key.

4.Use the Trackball to select a route.

5.Press the C: EDIT ROUTE soft key.

6.Press the A: PLOT soft key to show the plotter screen.

7.Operate the Trackball to place the cursor on the first (or last) waypoint of the route. A flashing diamond appears over the waypoint when it is correctly selected.

8.Press the C: ADD TO START soft key or the C: ADD TO END soft key depending on the waypoint you selected at step 7.

9.Operate the Trackball to place the cursor on an existing waypoint (C: ADD WPT soft

key appears) or new location (C: ADD NEW WP soft key appears).

10.Press the C: ADD WPT soft key (C: ADD NEW WP soft key).

11.Press the MENU key to close the menu.

Inserting a waypoint in an intermediate location on a route

1.Follow steps 1 through 6 in “Inserting a waypoint before the first or last waypoint in a route.”

2.Operate the Trackball to place the cursor on a line connecting waypoints. The C: SPLIT LEG soft key appears and the line flashes when it is correctly selected.

3.Press the C: SPLIT LEG soft key.

4.Move the cursor to a new location or select an existing waypoint, in which case the C: INSERT WPT soft key replaces the C: INSERT NEW WP soft key.

5.Press the C: INSERT WPT soft key (C: INSERT NEW WP soft key).

6.Press the MENU key to close the menu.

3.9.4Removing waypoints from a route

Removing a waypoint from the route list

1.Press the MENU key to open the menu.

2.Press the C: WAYPOINTS/ROUTES soft key.

3.Press the B: ROUTES soft key.

4.Select a route.

5.Press the C: EDIT ROUTE and B: LOCAL LIST soft keys.

6.Select the waypoint you want to remove.

7.Press the B: REMOVE WPT soft key.

8.Press the MENU key to close the menu.

Removing a waypoint from the plotter display

1.Press the MENU key to open the menu.

2.Press the C: WAYPOINTS/ROUTES soft key.

3.Press the B: ROUTES soft key.

4.Select a route.

5.Press the C: EDIT ROUTE soft key.

6.Press the A: PLOT soft key to show the plot screen.

3-38