Furuno 1964C-BB, GD-1920C-BB, 1954C-BB manual Radar Display, Transmitting, Stand-by, Radar display

2. RADAR OPERATION

This chapter covers radar operation, including the ARP (Auto Plotter) function. ARP requires a Model 18x4C-BB/19x4C-BB series network radar equipped with the ARP circuit board.

2.1Radar Display

North marker					Guard zone 2
(Head-up, Course-up mode)					Cursor
								Heading
Range/	Pulselength
					Heading line			M: Magnetic
range ring
								T: True
interval
Presentation		3nm				°		TRAIL 30m	Trail time
	12/LP				319. 9		M
mode	H-UP							02m30s	Trail elapsed time
Alarm icon								G1 IN	Guard zone 1
EBL1								G2 OUT	Guard zone 2
Battery icon								ES H	Echo stretch
	S I							EAV L	Echo averaging
Simulation
mode		M						IR L	Interference rejector
Guard zone 1									VRM2
Range ring
									EBL2
VRM1									Own ship vector
									(ARP-equipped model,
									true vector mode)
Zoom area									Zoom
									window
EBL1 bearing	EBL1 27.0°R		EBL2	327.1°R				+ 359.9 ˚R	Cursor range
VRM1 range	VRM15.666nm		VRM2	8.212nm				11.70nm
									and bearing
			EBL2 bearing, VRM2 range						(Cursor position may
									also be shown, in
									L/L or Loran C TD.)

Radar display

2.2Transmitting, Stand-by

1.Confirm that the network radar is plugged in.

2.Press the DISP key to select a radar display.

3.Press the POWER/TX key momentarily.

4.Press the D: RADAR STBY soft key to highlight TX on its label.

5.Press the E: RETURN soft key.

When the radar picture is not required, but you want keep it in a state of readiness, press the D: RADAR TX soft key to highlight STBY on its label.

2-1