Furuno GD-1920C-BB, 1954C-BB Activating Targets, Displaying Target Data, AIS target data display

5. AIS OPERATION

5.4Activating Targets

Use the trackball to place the cursor on the sleeping AIS target (indicates only the presence of a vessel equipped with AIS in a certain location) you wish to activate; that is, know more about a vessel’s motion.

SOG and COG vector

*1 Turning direction

Heading line*2

Activated target

*1: Vector shows STW (speed thru water) and CSE (course) when water tracking mode is selected at the radar.

*2: If there is no heading data, the line points in direction of COG.

5.5Displaying Target Data

1.Place the cursor on an AIS target symbol.

2.Plotter display: Press the ENTER knob.

Radar display: Press D: TARGET INFO.

Activated target selected for data display

MMSI No.	MMSI 123456789
Ship's Name	NAME QUEEN ELIZABETH
Course over Ground*, Speed over Ground#	COG 359° SOG 23.2kt
CPA and TCPA	CPA 2nm TCPA 12:35
Bearing, Range	BRG 359.4 RNG 10.8nm
Beam, Length	BEAM 32m LENGTH 294m

* = CSE (course) when water tracking mode is selected at radar.

#= STW (speed thru water) when water tracking mode is selected at radar.

AIS target data display

5-4