Furuno 1824C-BB, GD-1920C-BB, 1954C-BB, 1964C-BB, 1944C-BB Alarm information, Plotter alarm menu

3. PLOTTER OPERATION

3.11.9 Alarm information

When an alarm setting has been violated, the buzzer sounds and the speaker icon appears and is red. Press the CLEAR key to silence the alarm. You can see which alarm has been violated on the ALARM menu. In the example below the arrival alarm has been violated.

1.Press the ALARM key. The name of the offending alarm appears in the alarm information window.

Alarm information￿ window

AUDIO ALARM	INTERNAL BUZZ
ARRIVAL ALARM	ON 0.010nm
ANCHOR WATCH ALARM	OFF 0.010nm
PROXIMITY ALARM	OFF
XTE ALARM	OFF 0.050nm
SPEED ALARM	OFF
TRIP ALARM	OFF 0000.0nm

ALARM INFORMATION

ARRIVED

AT WAYPOINT XXX !￿

ALARM1

A EDIT

CCLEAR ALARM

DNEXT PAGE

E RETURN

Speaker icon

XXX = Destination waypoint name

Plotter alarm menu, page 1

2.Press the C: CLEAR ALARM soft key to acknowledge the alarm (and silence the buzzer if it was not done with the CLEAR key). The color of the speaker icon changes from red to background color. The icon remains on the screen until the cause of the alarm is eliminated or the alarm is disabled. If more than one alarm has been violated the message CONTINUE appears at the bottom of the alarm information window. In this case, press the B: NEXT INFO soft key to see which other alarms have been violated.

3.Press the ALARM key to finish.

Note: The alarm icon is red when an alarm setting is violated, and changes to background

color when the CLEAR key or C: CLEAR ALARM soft key is pressed. The color does not change regardless of how many other alarms are violated.

3-53