Furuno 1954C-BB manual Receiving Data Via Network Equipment, Receive data menu, Host name window

6. DATA TRANSFER

6.2Receiving Data Via Network Equipment

You can receive waypoints, routes, marks and lines from NavNet equipment.

1.Press the MENU key.

2.Press the E: SYSTEM CONFIGURATION soft key.

3.Press the D: DATA TRANSFER soft key.

4.Press the C: RECEIVE DATA VIA NETWORK soft key.

HOST NAME	PLOT1 - - -
MARKS & LINES	OFF

WAYPOINTS & ROUTES OFF

RECEIVE DATA

A EDIT

B RCV

E RETURN

Receive data menu

5. Select HOST NAME, then press the A: EDIT soft key.

HOST NAME

▲§

1 (NAVNET1)

2 (NAVNET2)

°3 (NAVNET3)

4 (NAVNET4)

▼

Host name window

6.Use the Trackball to choose host name from which to receive data, then push the ENTER knob.

7.Select the data you wish to receive, then press the A: EDIT soft key. For example, select

MARKS & LINES.

MARKS & LINES

▲

§°ON

OFF

▼

Marks & lines window

8.Select ON or OFF as appropriate, then press the C: ENTER soft key.

9.Turn WAYPOINTS & ROUTES on or off as appropriate.

10.Press the B: RCV soft key followed by the ENTER knob. The message “START RECEIVING DATA VIA NETWORK.” is displayed. If no data could be found, the message “(HOST NAME)’ IS NOT FOUND.” appears. When the transfer is completed, the message “DATA TRANSFER COMPLETED. PUSH ENTER KNOB TO CONTINUE.” appears. Push the ENTER knob to finish.

11.Press the MENU key to close the menu.

6-4