Furuno 1944C-BB, GD-1920C-BB manual Plotter Displays, Full-screen plotter display, Nav data window

3 PLOTTER OPERATION

3.1Plotter Displays

You may show the plotter display over the entire screen, in the overlay screen with the radar display, or in a combination screen.

3.1.1Full-screen plotter display

Nav data window

(Data changes with NAV soft key setting and cursor

status. For details see next page.)

	34° 22. 3456'N		359.9°M TRIP NU
	080° 22. 3456'E		19.9 kt	99.9 nm
Scale	16.0nm		S I M	A	MARK
					ENTRY
Icon (from left)				B	MODE
North Marker					NTH UP
Chart					NAV
Alarm				C
Track Hold					POS
Chart Offset	002WPT	FISH
Save
			BRIDGE
L/L Offset
Battery				E	D. BOX
Simulation
					ON/ OFF
(See icon
table on
page A-12
for details.)	Waypoint name			Track
			Own ship
	Waypoint marker	Course bar	marker

Full-screen plotter display

Soft keys

Note: When GPS signal error is found, the following occurs depending on the device feeding position data:

FURUNO BB GPS Receiver: Alarm icon () appears and the aural alarm sounds. Own ship marker blinks faster.

Other GPS receiver: The message “NO GPS FIX” appears and is accompanied by the aural alarm and alarm icon. If the GPS signal is missing for more than 90 seconds, the message “NO POSITION DATA” appears.

Nav data window

The data shown in the nav data window depends on the status of the C: NAV soft key and the cursor.

3-1