Furuno 1964C-BB, GD-1920C-BB Chart Setup, Chart offset, Plotter display, chart offset selected

7. CUSTOMIZING YOUR UNIT

7.4Chart Setup

This paragraph shows you how to setup digital charts, from offsetting chart position to turning chart attributes on or off.

7.4.1Chart offset

In some instances position may be off by a few seconds. For example, the position of the ship is shown to be at sea while it is in fact moored at a pier. You can compensate for this error by offsetting chart position as shown in the procedure below.

1.Show the plotter display, then press the MENU key followed by the A: CHART SETUP

and A: CHART OFFSET soft keys.

+	34° 22. 3456'N	353.9°M	TRIP	NUCHART
	080° 22.+3456'E	0.75nm	9.9	nm
				OFFSET

16.0nm

WP-002 FISH

BRIDGE

CSETOFFSET

DRESETOFFSET

E RETURN

Plotter display, chart offset selected

2.Use the Trackball to place the cursor at the correct latitude and longitude position of own ship.

3.Press the C: SET OFFSET soft key.

4.Press the MENU key to close the menu. The “chart offset icon” () appears at the top of the display.

To cancel chart offset, press the D: RESET OFFSET soft key at step 3 in the above procedure.

7-13