Furuno GD-1920C-BB Routes, Creating routes, Entering a route with existing waypoints, Route menu

3. PLOTTER OPERATION

3.9Routes

Often a trip from one place to another involves several course changes, requiring a series of route points (waypoints) which you navigate to, one after another. The sequence of waypoints leading to the ultimate destination is called a route. Your unit can automatically advance to the next waypoint on a route, so you do not have to change the destination waypoint repeatedly.

You can store up to 200 routes, and a route may have 35 waypoints.

3.9.1Creating routes

Entering a route with existing waypoints

This method constructs routes by using existing waypoints. This function requires SAFE ROUTE CHECK (C-MAP only).

1.Press the MENU key.

2.Press the C: WAYPOINTS/ROUTES soft key.

3.Press the B: ROUTES soft key to open the ROUTE menu. (No data will be shown if there are no routes entered.)

Total length of route

Route name

Number of waypoints in route

	001	LENGTH
▲				25.6 nm
		WAYPOINTS
		35
	002	LENGTH
				56.7 nm
		WAYPOINTS
		2
	003	LENGTH
				21.1 nm
		WAYPOINTS
		3
	004	LENGTH
				21.1 nm
		WAYPOINTS
		3
	PUSH ENTER KNOB TO		-	--
	SEARCH FOR

1/20

ROUTE

A GOTO

BNEW ROUTE

CEDIT ROUTE

DERASE ROUTE

E RETURN

Route menu

4. Press the B: NEW ROUTE soft key to open the new route entry screen.

3-33