Simulation Display, Simulation setup menu, Radar | Furuno 1824C-BB

1. OPERATIONAL OVERVIEW

1.10 Simulation Display

The simulation display, for use by service technicians for demonstration purposes, provides simulated operation to help acquaint you with the many features your unit has to offer. It allows you to view and control a simulated plotter, radar and sounder picture, without position-fixing equipment, network radar or a network sounder. Most controls are operative, thus you may practice setting destination, enter waypoints, measure range and bearing to a target, etc. Three simulation displays are provided for both the radar and echo sounder.

The simulation icon (SIM) appears when any simulation mode is active.

To start the simulation display;

1.Press the MENU key.

2.Press the E: SYSTEM CONFIGURATION, C: SYSTEM SETUP and D: SIMULATION SETUP soft keys in that order.

	RADAR	LIVE
	RADAR	LIVE
	PLOTTER	LIVE
	SOUNDER	LIVE
	SPEED	00.0kt
	COURSE	000.0°
	LATITUDE	45° 35.000'N
	LONGITUDE	125° 00.000'W
	START DATE & TIME	00:00 24.NOV.01
	GET RADAR SIMULATION DATA	NO

SIM

SETUP

A EDIT

E RETURN

Simulation setup menu

3.Follow appropriate procedure on the next several pages. To stop the simulation mode and return to normal operation, choose LIVE for radar, sounder or plotter.

Radar

NavNet processor unit-generated echoes or user data

1. Select RADAR, then press the A: EDIT soft key.

RADAR

▲

BUILT IN DATA 1

°BUILT IN DATA 2 §USER DATA

LIVE

▼

2.Select BUILT IN DATA 1 or 2 for internally generated echoes or USER DATA for user-saved radar data. Push the ENTER knob.

3.Press the MENU key to close the menu.

1-14

Image 27

Furuno 1824C-BB, GD-1920C-BB, 1954C-BB, 1964C-BB, 1944C-BB, 1934C-BB, 1834C-BB Simulation Display, Simulation setup menu, Radar

Contents

Page USA How to discard this product How to discard a used batteryGeneral European Union Safety Instructions Table of Contents Plotter Operation 10.4 AIS Operation Vii MAINTENANCE, Troubleshooting Features ViiiModel Output Range Radar antenna size, type Rotation speed Foreword System Configurations Single-unit NavNet system GD-1920C-BB Single-unit NavNet system GD-1920C-BB Three-or-more-unit NavNet system Max units XiiTwo-unit NavNet system Two-unit NavNet system Control unit Operating Controls Radar and plotter displays Soft keys Processor unit Inserting a Chart Card Turning the Unit On/Off Night Day Twilight Adjusting Hue, Panel IlluminationBrilliance adjustment soft keys Hue window Display screens Panel brilliance setting windowSelecting a Display Display modes Selecting a display Display screen selection windowRadar combination screen selection window To adjust plotter Switching control in combination and overlay screens Selecting image source Select source menuRadar source and sounder source windows Cursor, cursor data Trackball, Cursor Entering the MOB Mark, Setting MOB as Destination MOB conceptMOB mark messages Temporarily erasing a data box Data BoxesShowing, hiding data boxes with soft key Rearranging data boxes Function keys Function Default Setting, Key LabelFunction Keys Executing a function Simulation setup menu Simulation DisplayRadar Sounder Plotter This page intentionally left blank Radar Display Transmitting, Stand-byRadar display Gain sensitivity window TuningAdjusting the Gain Tuning window Reducing Sea Clutter How the A/C SEA worksEffect of A/C SEA Rain setting window Adjusting the A/C SEAAdjusting the A/C Rain SEA setting window Range scales km Range ScalePulselength Range scales nm, sm Function Indicator on display Soft key label Presentation ModeSelecting a presentation mode Signal process soft keys North-up Description of presentation modesHead-up Course-up Measuring range by cursor How to measure range to a target with the cursorMeasuring the Range Measuring range by range rings How to measure range with the VRM Measuring range by VRMVarious VRM operations Various EBL operations Measuring the BearingMeasuring bearing by cursor Measuring bearing by EBL Radar interference Erasing the Heading Line, North MarkerReducing Noise Interference Rejecting Radar Interference Zooming radar targets Zoom Zooming ARP, TTM targets ZoomTarget no. selection window Automatic shift Setting automatic shift maximum speedShifting the Picture Manual shift Using the Offset EBL Predicting collision coursePredicting collision course with the offset EBL Measuring range and bearing between two targets Measuring range & bearing between two targets Trail soft keys Echo TrailsTrail time Sample echo trails Multitone and monotone trails Starting echo trailsTrail gradation Trail color Echo trail mode Trail mode windowEcho Stretch Effect of echo averaging Echo Averaging Target soft keys Outputting TLL Data Guard Alarm Setting a guard alarm zoneHow to set a guard alarm zone How watchman works When the alarm is violated…Cancelling the guard alarm Watchman Second-trace echoes Setting watchman stand-by intervalSuppressing Second-trace Echoes Watchman window Waypoint marker Waypoint Marker 26 ARP, TTM Operation Usage precautions for ARP ARP target info window ARP setup menuActivating/deactivating ARP, TTM Acquiring and tracking targets ARP ARP plot symbols Automatic acquisitionAutomatic acquisition area window Terminating tracking of all targets Displaying target number ARP, TTMTerminating tracking of ARP targets Terminating tracking of selected targets Setting vector attributes ARP What is a vector?Vector reference, vector time History interval window Displaying past position ARP26.7 ARP, TTM target data Past position displays ARP target data 26.8 CPA/TCPA alarm ARP CPA distance Lost target alarm ARPCanceling a lost target Lost target mark Sidelobe echoes Interpreting the Radar DisplayFalse echoes Multiple echoes Appearance of Sart signal on the radar display Sart Search and Rescue TransponderShadow sector General procedure for detecting Sart response Appearance of racon signal on the radar displayRacon Radar Beacon Nav data window Plotter DisplaysFull-screen plotter display Full-screen plotter display Plotter Operation Contents of nav data window Nav graphic display Compass displayCompass display XTE range setting window Reading the XTE cross-track error monitor Anemometer display Anemometer display Highway display Highway display Nav data displays Nav data display Course-up Auto course-upPerspective C-map only North-up Shifting the Display Chart ScaleChart Cards Chart card overview Indices and chart enlargement Sample chart Japan, showing indicesWhen a chart cannot be displayed Data for aids to navigation Navionics Gold chartsPort service icons Plotter display, showing port service display Object information window Current or tide dataCurrent data display Object information Find window Find function Example of caution area window MAP chartsCursor and data display Objects window Icon data Lighthouse iconObject windows Sample lighthouse data Tide informationTide window Map, port service display Date windowFind function Track control menu Working with TrackDisplaying track Own ship track Stopping, restarting plotting of own ship track Changing track colorOwn ship’s track Interval window Track plotting method and interval for own ship trackOwn ship track color window Track plotting method Track memory window Changing own ship track/mark distribution settingTrack plotting interval Interval windows Erasing own ship track by color Erasing trackErasing own ship track by area Erase menu Erasing all own ship track Marks, LinesEntering a mark, line Erase track by color window Marks shape window Changing mark attributesSelecting line type Marks & lines menu Erasing an individual line Erasing marks, linesLines style window Erasing an individual mark Entering a waypoint at own ship position WaypointsEntering waypoints Erasing all marks, lines Waypoint window Waypoint mark shape selection windowWaypoint mark color selection window Entering a waypoint by range and bearing Editing waypoint data from the waypoint list Editing waypoint dataEntering a waypoint from the waypoint list Alphanumeric and local waypoint lists Erasing a waypoint directly from the plotter display Erasing waypointsEditing a waypoint from the plotter display Plotter display Erasing a waypoint from the waypoint list Changing waypoint mark size Navionics Gold chartsChart configuration menu Erasing a waypoint from the menu Alphanumeric list Searching waypoints Route menu RoutesCreating routes Entering a route with existing waypoints New route entry screen Entering a route with the cursorCreating voyage-based routes Save route menu Save route windowDisplays for entry of time, distance interval Connect route window Connecting routes Waypoint list for editing a Route local list Inserting waypointsInserting a waypoint from the route list Edit route menu Removing a waypoint from the plotter display Removing waypoints from a routeInserting a waypoint from the plotter display Removing a waypoint from the route list Selecting quick point entry method NavigationErasing routes Navigating to a quick point Selecting a waypoint from the plotter display Navigating to waypointsNavigating to a single quick point Navigating to multiple quick points Navigating to ports, port services NavChartTM only Selecting an external waypointQP window Select Service Port services and sample port list Navigating waypoints in reverse order Following a routeSelecting the route to follow Plotter display, route selected as destination Example of when to restart navigation Restarting navigationLog display Select speed for ETA window Setting speed for ETA calculationSwitching waypoints Automatic waypoint switching methods Canceling route navigation Through the menuOn the plotter display Audio alarm window AlarmsAudio alarm on/off Plotter alarm menu Arrival alarm How the arrival alarm worksArrival alarm window Anchor watch alarm How the anchor watch alarm worksAnchor watch alarm window XTE alarm window XTE Cross-Track Error alarmSpeed alarm How the XTE alarm works Trip alarm window Proximity alarmTrip alarm Proximity alarm window Grounding alarm window Grounding alarm C-MAP specification Plotter alarm menu, Alarm information Alarm messages Plotter alarm messages and their meaningsMessage Meaning General setup menu, Resetting Trip Distance This page intentionally left blank Display mode window Sounder DisplaysSelecting a sounder display Dual-frequency display Description of sounder displaysSingle-frequency display Indications on the single frequency display Sounding area and transmission frequency Marker-zoom displayMarker-zoom display plus normal sounder display Bottom-lock display plus normal sounder display Bottom-zoom displayBottom-zoom display plus normal sounder display Bottom-lock display Scope display Bottom discrimination displayBottom discrimination display Scope display display only Types of automatic sounder modes Automatic Sounder OperationSelecting screen split method in combination displays How the automatic sounder works Selecting display range How to enable automatic sounder operationSelecting the manual mode Manual Sounder Operation Gain window Adjusting the gainShifting the range Examples of proper and improper gain Types of interference How to measure depth and timeMeasuring Depth, Time Reducing Interference Clutter window Reducing Low Level NoiseNoise limiter window Appearance of clutter Signal level window Erasing Weak EchoesAppearance of weak echoes Advancement independent of ship’s speed Color bar 16 color when white marker function is activeWhite Marker Picture Advance Speed How the speed-dependent picture advance mode works Advancement synchronized with ship’s speedPicture advance window Display Colors Hue no. and background and echo colorsHue No Echo Color Background Color Alarm audio window Sounder alarm menu Fish alarm window Bottom alarmFish alarm Bottom alarm window Water temperature alarm window Fish alarm B/LWater temperature alarm Fish alarm B/L window Sounder alarm messages and their meanings When an alarm setting is violated Water Temperature Graph Changing Pulse Repetition RateSaving Sounder Picture to an SD Card Zero line Interpreting the Sounder DisplayZero line Bottom echo Surface noise/aeration Fish school echoesSurface noise/Aeration Fish school echoes This page intentionally left blank AIS Option menu Turning AIS Feature On/Off Vector mode AIS Display Mode window Symbol Description AIS SymbolsSetting Number of AIS Targets to Display AIS symbols Activated target selected for data display Activating TargetsDisplaying Target Data Plotter display Press the Enter knob Confirming a lost target Setting CPA and TcpaLost Target Lost target Proximity Alarm CPA windowTcpa window Showing, Hiding AIS Target Tracks Choosing Vector TimeAIS vector time window AIS past position displays Displaying Past Positions of AIS Targets Deleting all data other than chart data from memory cards Memory Card OperationsSave data menu Message Reason Remedy Saving data to a memory cardMemory card messages Memory card messages Load data menu Playing back data from a memory card Marks & lines window Receiving Data Via Network EquipmentReceive data menu Host name window Select sentence menu Outputting Data Through the Network This page intentionally left blank General setup menu General Setup Con’t on next Contents of general setup menu Contents of general setup menu con’t from previous Radar Setup Radar display setupRadar display setup menu Contents of radar display setup menu Contents of radar display setup menu con’t from previous Radar range setup Radar range setup menuModel Maximum Range Radar function key options Function key setupFunction Key Default Function Radar function key menu Menu Item Function Function Key Label Radar function keys Plotter Setup Plotter setup menu Contents of plotter setup menuNavigation options Key Plotter function key menu Plotter function keys Chart Setup Chart offsetPlotter display, chart offset selected Navionics Gold chart attributes Contour Line Soft key MAP chart attributesDisplaying the Chart Configuration menu Chart configuration menu C-MAP Chart Configuration menu description Chart Configuration menu description Object Content Setting Description Chart Configuration menu description con’t from previous Normal or U.ZOOM or O.ZOOM Safety Status Indication Setting Description Depth Config soft keyDepth Config menu Depth Config menu description Setting Setting Range Default Setting Setting Description Default Setting Data box menu Data Boxes Setup Hot page setup menu Hot Page Setup Navigator Setup Hot page setup menu, Split X 3 screen, sub screen selectionNavigation data source Contents of nav setup menu GPS setup menu Contents of GPS setup menu Furuno BB GPS receiver setup Contents of GPS setup menu con’t on previous GPS Status TD display setup Contents of Waas Setup menuTD setup menu Displaying Decca TDs Displaying Loran C TDsLoran GRI & station pair window Loran C GRI & station pair window Nav data setup screen Nav Data Display Setup Sounder system setup menu Sounder SetupSystem setup Nav data setup window HF,LF Sounder system setup menu description STC HF, LF Sounder system setup menu description con’t from previous Setting range for default Default Setting Sensor setupSensor setup menu Sensor setup menu settings Zoom range and bottom-lock ranges Sounder range setup menuDefault basic ranges Sounding range, zoom range, bottom lock range Sounder function key options Sounder function key menu Sounder function keys Depth graph up-date window Nav Graphic Display SetupNAV Graphic menu Graphic meter window Preventive Maintenance Maintenance programCheck point Remedy Replacement of Batteries Replacement of FuseBattery on circuit board Radar model and magnetron used Trackball MaintenanceReplacing the Magnetron Replacing the Synchro Belt 1824C-BB only Radar Simple TroubleshootingGeneral troubleshooting Radar troubleshooting Plotter troubleshooting PlotterIf… Sounder Sounder troubleshooting Diagnostics Memory I/O testMemory I/O Test menu GPS receiver test results Processor unit testProcessor unit test results GPS sensor test Requires a Furuno BB GPS receiver ARP test results Network sounder test results Test pattern sequence Test pattern Keyboard test Screen for testing keyboard GPS Status Display GPS status displayAbout the GPS status display Clearing Memories Memory clear menuWindows for clearing memory Error Messages Error messagesError Message Meaning Remedy General AP-1 Menu Overview Appendix AP-2 AP-3 Setup AP-4 NAV Graphic Display Setup PURPLE, BLUE, White Interval TIME, Distance AP-5 MAP AP-6 AP-7 Zoom Marker ON, OFF HUE AP-8 Sounder Alarms Alarm keyRadar Alarms Plotter Alarms AP-10 Geodetic Chart List Icons AP-11Icon Meaning AP-12 Model 18x4C-BB/19x4C-BB Series Specifications of Marine RadarPage Transceiver Module Plotter Function Coating Color Specifications of Video Plotter GD-1920C-BB IN-1 Index Index IN-2 Messages IN-3 IN-4 Proximity alarm Trackball IN-5Page Page