Furuno 1824C-BB, GD-1920C-BB, 1954C-BB manual Selecting a display, Display screen selection window

1. OPERATIONAL OVERVIEW

1.5.2Selecting a display

1.Press the DISP key to show the display screen selection window. The icons of modes not available are shaded. HOTPAGE 1-HOTPAGE 6 are user-arrangeable displays called “hot pages,” which you can configure as you like. For further details, see the paragraph “7.6 Hot Page Setup.”

Selected item

RADAR PLOTTER SOUNDER NAV DATA OVERLAY EXT VIDEO WX FAX

HOTPAGE 1 HOTPAGE 2 HOTPAGE 3 HOTPAGE 4 HOTPAGE 5 HOTPAGE 6

·TURN KNOB TO SELECT MODE AND PUSH KNOB TO ENTER.

·PUSH ANY SOFT KEY TO SELECT IMAGE SOURCE.

Basic display screens

Hot pages

Display screen selection window

Note: “WX FAX” is available only when the facsimile receiver FAX-30 is connected. If the message “AUX SOURCE IS DISCONNECTED. PUSH ENT KNOB TO EXIT.” appears, press the ENTER knob and select other item.

2.Rotate the ENTER knob to select a basic display screen or a hot page screen.

3.Push the ENTER knob.

4.If you select a basic display screen, a group of appropriate combination displays appear. In the example below, the radar combination screens are shown. When WX FAX is selected at step 2, a combination display does not appear.

PUSH ENTER KNOB. RETURN

Radar combination screen selection window

5.Rotate the ENTER knob to select display desired.

6.Push the ENTER knob to finish.

1-7