Furuno 1954C-BB, GD-1920C-BB, 1964C-BB, 1944C-BB manual Selecting image source, Select source menu

1. OPERATIONAL OVERVIEW

1.5.4Selecting image source

When more than one network radar or network sounder is connected to the equipment, you may select an image source for each as shown below. This is not necessary when only one network radar or network sounder is connected.

1.Press the DISP key.

2.Press any soft key to show the following display.

▲RADAR SOURCE	1 (HOST NAME: NAVNET-1)
SOUNDER SOURCE	ETR1 (HOST NAME: SOUNDER)
AUX SOURCE	AUX 1 (HOST NAME: WXFAX)
IP ADDRESS	172.031.003.003
DEVICE NUMBER	1 (HOST NAME: NAVNET-1)

IF THERE IS MORE THAN

ONE NETWORK RADAR OR

ECHO SOUNDER, YOU MAY

SELECT THE IMAGE

SOURCES FOR DISPLAY.

SELECT SOURCE

EDIT

RETURN

Select source menu

3.Use the Trackball to select RADAR SOURCE, SOUNDER SOURCE or AUX SOURCE as appropriate, then press the A: EDIT key.

RADAR SOURCE

▲

~1 (NAVNET1) { 2 (NAVNET2) { 3 (NAVNET3) { 4 (NAVNET4)

▼

Radar source

SOUNDER SOURCE

▲

~ETR0 (SOUNDER) {{ ETR1 (SOUNDER1) { ETR2 (SOUNDER2) { ETR3 (SOUNDER3) { ETR4 (SOUNDER4) { ETR5 (SOUNDER5) { ETR6 (SOUNDER6) { ETR7 (SOUNDER7) { ETR8 (SOUNDER8) { ETR9 (SOUNDER9)

▼

Sounder source

AUX SOURCE

▲

~AUX1 (WXFAX) { AUX2 (WXFAX1) { AUX3 (WXFAX2) { AUX4 (WXFAX3)

▼

Aux source

Radar source and sounder source windows

4.Use the Trackball choose source name:

5.Push the ENTER knob to set.

6.Press the DISP key to finish.

7.Turn the power off and on again.

1-9