Furuno GD-1920C-BB, 1954C-BB, 1964C-BB Waypoints, Entering waypoints, Erasing all marks, lines

3. PLOTTER OPERATION

5.Move the cursor to the bottom right-hand corner of the area which you want to erase marks and lines from.

6.Press the C: END soft key or the ENTER knob. You are asked if you are sure to delete the marks/lines selected. Press the ENTER knob to delete.

7.Press the MENU key twice to close the menu.

Erasing all marks, lines

You can erase all marks and lines collectively. Be absolutely sure you want to erase all marks and lines - erased marks and lines cannot be restored.

1.Press the MENU key followed by the A: CHART SETUP, B: TRACKS & MARKS

CONTROL and C: ERASE T & M soft keys to show the ERASE menu.

2.Use the Trackball to select ERASE ALL MARKS/LINES, then press the A: EDIT soft key.

3.Push the ENTER knob to erase all marks and lines.

4.Press the MENU key twice to close the menu.

3.8Waypoints

In navigation terminology, a waypoint is a particular location on a voyage whether it be a starting, intermediate or destination point. A waypoint is the simplest piece of information your equipment requires to get you to a destination, in the shortest distance possible.

This unit has 999 waypoints into which you can enter position information. You may enter a waypoint five ways: at own ship position, at MOB position (see page 1-11 for details), by cursor, by range and bearing, and through the waypoint list (manual input of latitude and longitude).

3.8.1Entering waypoints

Entering a waypoint at own ship position

Press the SAVE/MOB key momentarily to store your position as a waypoint. This new waypoint is saved to the waypoint list, under the youngest empty waypoint number.

Entering a waypoint with the cursor

1.Press the MENU key to open the menu.

2.Press the C: WAYPOINTS/ROUTES, A: WAYPOINTS and C: WAYPOINT BY CURSOR soft keys. The plotter display appears.

3.Operate the Trackball to place the cursor where you want to enter a waypoint.

4.Press the D: NEW WPT soft key. The waypoint window appears and it shows waypoint

mark shape, waypoint name, comment (default: time and date), position of waypoint and proximity alarm radius.

3-26