Furuno 1954C-BB, GD-1920C-BB, 1964C-BB, 1944C-BB, 1934C-BB, 1834C-BB, 1824C-BB manual Plotter Function

5	PLOTTER FUNCTION
5.1	Projection	Mercator
5.2	Usable Area	85 latitude or below
5.3	Effective Area	211.2 x 158.4 mm
5.4	Display pixels	640 x 480 dots
5.5	Position Indication	Latitude/longitude, Loran C LOP or DECCA LOP

5.6Effective Projection Area 0.125 nm to 1,024 nm (at equatorial area)

5.7	Track Display	Plot interval: by time (1 sec. to 99 min. 59 sec.) or
		by distance (0 to 99.9 nm)
5.8	Colors	Red, yellow, green purple, light-blue, blue, white
5.9	Memory Capacity	Track/mark: 8000 points, Waypoint: 999 points
5.10	Storage Capacity	Simple route: 200 routes with 35 waypoints each

6 POWER SUPPLY

6.1Rated Voltage/Current

	M1824C-BB	12-24 VDC: 5.5-2.7 A
	M1834C-BB	12-24 VDC: 5.3-2.6 A
	M1934C-BB (24rpm)	12-24 VDC: 5.6-2.7 A
	M1934C-BB (48rpm)	12-24 VDC: 7.5-3.6 A
	M1944C-BB (24rpm)	12-24 VDC: 6.3-3.1 A
	M1944C-BB (48rpm)	12-24 VDC: 8.1-3.8 A
	M1954C-BB (24rpm)	12-24 VDC: 8.6-4.3 A
	M1954C-BB (48rpm)	12-24 VDC: 10.3-5.1 A
	M1964C-BB (24rpm)	12-24 VDC: 10.1-5.0 A
	M1964C-BB (48rpm)	12-24 VDC: 11.6-5.6 A
6.2	Rectifier (option)	100-115/220-230 VAC, 1 phase, 50/60 Hz
7	ENVIRONMENTAL CONDITION
7.1	Ambient Temperature	Antenna Unit: -25°C to +70°C
		Processor Unit and Control Unit: -15°C to +55°C
		Power Supply Unit: -15°C to +55°C
7.2	Relative Humidity	93 % or less at +40°C
7.3	Waterproofing	Antenna Unit: IPX6
		Control Unit: IPX5 (Front panel), IPX2 (Rear panel)
		Processor Unit, Power Supply Unit: IPX0
7.4	Vibration IEC 60945-4th	- 2 Hz-5Hz and up to 13.2 Hz with an excursion of ±1 mm ±10%
		(7 m/s2 maximum acceleration at 13.2 Hz);

- above 13.2 Hz and up to 100 Hz with a constant maximum acceleration of 7 m/s2.

SP - 4