Furuno GD-1920C-BB, 1954C-BB, 1964C-BB manual Zooming ARP, TTM targets, Target no. selection window

Zoom area

12/LP	319. 9°M
3nm		ZOOM &
HU
		D. BOX
		A	ZOOM
			ON /OFF
		B	CURSOR
			FLOAT
		C	ARP
			TGT ZM
		D	D. BOX
			ON / OFF

E RETURN

+ 359.9 ˚R 5.727nm

Zoom window

Zoom

2. RADAR OPERATION

Requires optional ARP Board in

Model 18x40-BB/19x4-BB series network radar.

Not shown otherwise.

2.15.2 Zooming ARP, TTM targets

You may zoom in on TTM (Tracked Target Message) and ARP targets. TTM targets can come from a NavNet connected radar, or from other ARP radar that is outputting the TTM message. (TTM is a NMEA 0183 data sentence that is an available output from some ARP capable radar.) Target numbers must be turned on to use this function. This can be done by enabling the target ID number option in the ARP SETUP menu. This function is available when TARGET ID NUMBER is ON.

1.If not displayed, press the HIDE/SHOW key to show the radar soft keys.

2.Press the E: ZOOM/D. BOX soft key to show ZOOM & D. BOX soft keys.

3.Press the A: ZOOM ON/OFF soft key to select ZOOM ON.

4.Press the C: ARP TGT ZM soft key.

SELECT TARGET NO.

▲

1

▼

Target no. selection window

5.Use the ENTER knob to select number (1-10), then push the ENTER knob. If the target number does not exist several beeps sound and the zoom function is cancelled.

.

To cancel, press the B: CURSOR LOCK soft key.

Note: The zoom window blends in with the background when the background color for the radar picture is white. If the window is difficult to see, change the background color.

2-13