Furuno 1834C-BB Memory Card Operations, Deleting all data other than chart data from memory cards

6. DATA TRANSFER

6. DATA TRANSFER

This chapter provides information for saving and replaying data to and from memory cards, and receiving and outputting data through the network.

6.1Memory Card Operations

The memory cards store these data: marks, lines, waypoints, routes, track, position, water temperature and setting data (plotter only). The following memory cards may be used:

Kingstone: SD-M64B1 (64 MB), SD-M128B1 (128 MB)

Viking: 32SD-M32B1 (32 MB), 64SD-M64B1 (64 MB)

EP Memory: 32 MB, 64 MB

SANDISK: 64SDSDB-64-J60 (64 MB), 128SDSDB-128-J60 (128 MB)

Panasonic: 64 RP-SD064BL1A (64 MB), 128RP-SD128BL1A (128 MB)

Toshiba: 64 SD-NAD064MT (64 MB), 128 SD-NA128MT (128 MB)

6.1.1Deleting all data (other than chart data) from memory cards

Follow the procedure below to delete all data (other than chart data) from memory cards.

1.Insert a blank memory card into the card slot.

2.Press the MENU key followed by the E: SYSTEM CONFIGURATION, D: DATA

TRANSFER, A: SAVE/LOAD DATA and C: SAVE DATA TO MEMORY CARD soft keys to show the SAVE DATA menu.

▲

TRACKS MARKS & LINES WAYPOINTS & ROUTES SETTING DATA*

OFF OFF OFF OFF

SAVE DATA

A EDIT

B SAVE

D DELETE

E RETURN

* = Plotter data only

Save data menu

3.Press the D: DELETE soft key. You are asked if you are ready to delete the contents of the memory card.

4.Push the ENTER knob to format (or press the CLEAR key to escape). “NOW DELETING MEMORY CARD” appears. Do not remove the card while its contents are being deleted. When the formatting is completed, “DELETE COMPLETED. PUSH ENTER KNOB TO CONTINUE.” appears.

5.Push the ENTER knob to continue.

6-1