Furuno 1934C-BB, GD-1920C-BB, 1954C-BB, 1964C-BB, 1944C-BB, 1834C-BB, 1824C-BB System Configurations

SYSTEM CONFIGURATIONS

All NavNet products incorporate a “network circuit board” to integrate each NavNet product on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is assigned an IP address to enable transfer of images between other NavNet products. For example, video plotter pictures can be transferred to a radar and vice versa. Pictures received via the NavNet may be adjusted at the receiving end.

The number of processor units which may be installed depends on the number of network sounder connected. For a system incorporating three or more products, a “hub” is required to process data.

For one network sounder: one radar and three plotters, or four plotters

For two network sounder: one radar and two plotters, or four plotters

Note: NavNet2 equipment cannot be connected to initial version NavNet equipment.

NavNet system (Model 1824C-BB/1834C-BB/1934C-BB/1944C-BB/1954C-BB/ 1964C-BB)

MODEL1824C

Antenna Unit

MODEL	MODEL	MODEL	MODEL	MODEL
1964C	1954C	1934C	1944C
				1834C

Power Supply Unit
PSU-005	Display unit
(MODEL 1954C)
Power Supply Unit	RDP-149
PSU-008
(MODEL 1964C)

GPS Receiver GP-320B/330B

OR

Weather Station

WS-200

Echo sounder

Navigator

External buzzer

PC

AIS transponder	AIS Interface	ARPA
	IF-1500AIS*
		ARP-11
	* Not required for AIS
		(Built-in)
	Transponder FA-150

	Rectifier	Facsimile
	RU-3423
		Receiver
		FAX-30
	100/110/115/220/230 VAC 12 - 24 VDC*
	1φ, 50/60 Hz*
: Standard	*: The power for the power supply unit
: Option	and display unit must be drawn from
: Local supply	the same power source.

Network

Sounder

ETR-6/10N

ETR-30N

VGA monitor Remote display Video equipment

Heading sensor

HUB	FA-30
	AIS RECEIVER

Other NavNet unit (GD-1920C, etc.)

NavNet system (Model 1824C-BB/1834C-BB/1934C-BB/1944C-BB/1954C-BB/1964C-BB)

x