Furuno 1834C-BB, GD-1920C-BB, 1954C-BB, 1964C-BB, 1944C-BB Navigator Setup, Navigation data source

7. CUSTOMIZING YOUR UNIT

5.Rotate the ENTER knob to select a main screen, then press the ENTER knob. For example, select the radar display. Your choice is then shaded to show that is has been selected.

HOT PAGE 1

RADAR PLOTTER SOUNDER

Sub screen

COMPASS HIGHWAY EXT VIDEO

Hot page setup menu, SPLIT X 3 screen, sub screen selection

6.Rotate the ENTER knob to select the screen to show at the top right 1/4 screen, then press the ENTER knob or the C: ENTER soft key.

7.Rotate the ENTER knob to select the screen to show at the bottom right 1/4 screen, then press ENTER knob or the C: ENTER soft key.

Note: The A: SELECT WINDOW soft key functions to select the window to process.

8.Press the MENU key to close the menu.

7.7Navigator Setup

This section provides the information necessary for selecting the type of navigator connected to your plotter.

7.7.1Navigation data source

The NAV SETUP menu mainly selects the source of nav data. For GPS receiver other than a FURUNO BB GPS receiver, speed averaging and local time offset (to use local time) are also available. Press the MENU key followed by the E: SYSTEM CONFIGURATION, B:

NAV OPTION and A: NAV SOURCE SETTINGS soft keys to display this menu.

POSITION SOURCE		ALL
SPEED(STW) SOURCE		ETR
TEMPERATURE SOURCE		ETR
DE`PTH SOURCE		ETR
STW CALIBRATION		0%
TEMP CALIBRATION		+0.0°F
DEPTH CALIBRATION		+0.0ft
WIND AVERAGING		5 minutes
WIND DIRECTION OFFSET		P0.0°
WIND SPEED CALIBRATION		00°F
WIND(MWV) SOURCE		FURUNO BB GPS
STW	TEMP	DEPTH
12.3 kt	56.3°F	99.5ft
WIND SPEED	WIND DIR
1.2 kt	131°

NAV

SETUP1

EDIT

NEXT

PAGE

RETURN

AIR TEMPERATURE SOURCE	FURUNO BB GPS
AIR PRESSURE SOURCE	FURUNO BB GPS

NAV

SETUP2

EDIT

PREV>

PAGE

Page 1 Page 2

7-23