Nikon COOLPIXP7000 Error Messages, 205, Display Description Solution, Display automatically when

Error Messages

The following table lists the error messages and other warnings displayed on the monitor, as well as the solutions for dealing with them.

Display	Description	Solution	A
O	Clock not set.	Set clock.	170
(blinks)
B	Battery is running low.	Prepare to charge or change battery.	16, 18
N	Battery exhausted.	Charge or change battery.	16, 18
Battery exhausted.
		Turn off camera, and allow battery to
		cool down before resuming use. Five
		seconds after this message appears,
		the monitor is turned off, and the
P	Battery temperature is	power-on lamp, the AF lamp and the	19
Battery temperature high	high.	flash lamp flicker. After the lamps
		blink for three minutes, the camera
		turns off automatically, but you can
		also press the power switch to turn it
		off manually.
P	Camera cannot	Wait until message clears from
Please wait for the	perform other
		display automatically when	–
camera to finish	operations until
		recording is complete.
recording.	recording is complete.
N	Write-protect switch is	Slide the write-protect switch to		Technical
P			23
Memory card is write	in “lock” position.	“write” position.
protected.
P	memory card.	• Use an approved card.	221	Notes
		• Confirm that memory card is	22
This card cannot be used.	Error accessing	• Check that connectors are clean.	22
This card cannot be read.		correctly inserted.		and
		card is deleted when formatted. If		Index
		All data stored on the memory
P		there is any data on the card that
Card is not formatted.	Memory card has not
		you want to keep, select No, and
Format card?	been formatted for use		23
		backup the data to a computer
Yes	in this camera.	before formatting the memory card.
No
		To format the memory card, select
		Yes and press the kbutton.

205