Setup Menu

Auto Off

Press the dbutton Mz (Setup menu) (A168) MAuto off

If no operations are performed for a certain period while the camera is on, the monitor is turned off to save power and the camera enters standby mode (A19). In this menu, set the time before the camera enters standby mode.

Choose from 30 s, 1 min (default setting), 5 min and 30 min.

Basic Camera Setup

CWhen the Monitor Is Turned Off to Save Power

The power-on lamp blinks in standby mode.

The camera turns off when the standby mode continues for about three minutes.

When the power-on lamp blinks, turn on the monitor again with one of the following operations.

-Press the power switch, shutter-release button or the cbutton.

-Rotate the mode dial.

BAuto Off Setting

In the following situations, the time taken for the camera to enter standby mode is fixed.

When menus are displayed: three minutes

When tone level information is displayed (shooting mode): three minutes

During slideshow playback: maximum of 30 minutes

When the AC adapter EH-5a is connected: 30 minutes

181

Page 195
Image 195
Nikon COOLPIXP7000 user manual 181, Auto Off Setting, Press the dbutton Mz Setup menu A168 MAuto off