Nikon COOLPIXP7000 user manual Vibration Reduction, 175, On default setting

Setup Menu

Vibration Reduction

Press the dbutton Mz(Setup menu) (A168) MVibration reduction

Set the vibration reduction for taking still pictures and movies. Use to correct blur, which is caused by the slight hand movements known as camera shake that commonly occur when shooting at the telephoto zoom position or at slow shutter speeds.

When the camera is stabilized for still picture shooting with a tripod, set vibration reduction to Off.

On (default setting)

Compensates for camera shake. The camera automatically detects the panning direction and only corrects for vibration caused by camera shake.

When the camera is panned horizontally, for example, vibration reduction only reduces vertical shake. If the camera is panned vertically, vibration reduction only compensates for horizontal shake.

Off

Vibration reduction is disabled.

When vibration reduction is enabled, the current setting is displayed during shooting (A6, 25). Nothing is displayed when the setting is Off.

BNotes on Vibration Reduction

•After the power is turned on or the camera enters shooting mode from playback mode, wait until the display stabilizes before shooting.

•Due to the characteristics of the vibration reduction function, images displayed on the monitor immediately after shooting may appear blurry.

•Vibration reduction may be unable to completely eliminate the effects of camera shake in some situations.

Basic Camera Setup

175