Nikon COOLPIXP7000 Monitor Settings, Change the settings for the options below, Image review

Setup Menu

Monitor Settings

Press the dbutton Mz(Setup menu) (A168) MMonitor settings

Change the settings for the options below.

Image review

On (default setting): Picture is displayed on the monitor immediately after it is taken and the monitor display returns to shooting mode.

Off: Picture is not displayed after it is taken.

Zoom in on active focus point: Picture is displayed on the monitor immediately after it is taken and the monitor display returns to the shooting mode. An enlarged image of the focused section is displayed in the area where focusing is performed.

Brightness

Choose from five settings to select the monitor brightness. The default setting is 3.

Photo info

Choose the display options that are displayed on the monitor during shooting. Separate display options can be selected for when the monitor display (A14) is set to Show info and when it is set to Hide info. In the default setting, all options are hidden.

•To select show or hide, choose an option with the rotary multi selector, and then press the kbutton to turn the check box on w or off.

•After finishing the setting, choose Confirm and press the kbutton.

XVirtual horizon YView/hide histograms ZView/hide framing grid

		1342			1342			1342
1/250	F5.6		1/250	F5.6		1/250	F5.6

Basic Camera Setup

Display the virtual horizon for checking whether the camera is horizontal.

When the camera is horizontal or vertical, the horizontal line on the virtual horizon display turns green.

Display a graph that shows the brightness distribution in the picture. The horizontal axis corresponds to pixel brightness, with dark tones to the left and bright tones to the right. The vertical axis shows the number of pixels.

Display a boxed guide for framing.

BNotes on Monitor Display Settings

•The display options are not displayed in auto mode, scene mode or low noise night mode. Only the grid is displayed in movie mode.

•In shooting modes E, Fand N, Photo info in the setup menu settings cannot be set. Select

the E, For Ntab and set Photo info in the specialized menus for E, Fand N(A13, 112). 173