Remote control

Shooting with Remote Control

Basic Photography and Playback: A (Auto) Mode

Use the remote control ML-L3 (available separately) (A200) to release the shutter. It is convenient for taking self-portraits and effectively eliminates blur caused by camera shake that occurs when the shutter-release button is pressed.

Use of a tripod is recommended during shooting with the remote control. Set Vibration reduction (A175) in the setup menu (A167) to Off when using a tripod to stabilize the camera.

1 Press n(self-timer) on the rotary multi selector.

The self-timer menu is displayed.

2 Choose Remote control mode using the rotary multi selector and press the kbutton.

Z(quick-response remote): Press the send button on the remote control to shoot instantly.

Z10s (ten seconds remote): Press the send button on

the remote control to shoot ten seconds after the camera has focused.

Z2s (two seconds remote): Press the send button on the remote control to shoot two seconds after the camera has focused.

The icon for the selected remote control mode is displayed.

If the kbutton is not pressed within a few seconds, the selection is set and the setting menu disappears.

3 Frame the picture.

1/250

F5.6

32

38

Page 52
Image 52
Nikon COOLPIXP7000 user manual Shooting with Remote Control