Nikon COOLPIXP7000 Setting the Flash Mode, Press the Kflash pop-up button, Using the Flash

Models: COOLPIXP7000

1 240
Download 240 pages 52.2 Kb
Page 47
Image 47

Using the Flash

Setting the Flash Mode

1 Press the K(flash pop-up) button.

Built-in flash is raised.

When the built-in flash is lowered, the flash mode is fixed to W(Off ).

2 Press m(flash mode) on the rotary multi selector.

The flash mode menu is displayed.

3 Use the rotary multi selector to choose the desired mode and press the kbutton.

When the manual flash is chosen, choose the flash output with Jor Kbefore pressing the kbutton.

Auto

Basic Photography and Playback: A (Auto) Mode

The mode selected for the flash is displayed.

When U (Auto) is applied, Dis only displayed for a few seconds even if monitor indicators (A14) are turned on.

If the kbutton is not pressed within a few seconds, the selection is set and the setting menu disappears.

BLowering the Built-in Flash

When not using the built-in flash, gently push to lower the flash until it clicks shut.

1/250

F5.6

32

 

 

 

33

Page 47
Image 47
Nikon COOLPIXP7000 Setting the Flash Mode, Press the Kflash pop-up button, Press mflash mode on the rotary multi selector