BASIC OPERATIONS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 3 | 2 | ||
|
|
|
|
|
ENGLISH
Turning on the power
1 Turn on the power.
Note on
When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
2 Select the source.
To operate the tuner (FM or AM), see pages 7 – 9.
To play a CD,
see pages 10 – 12.
4 Adjust the sound as you want. (See pages 13 and 14.)
To drop the volume in a moment
Press 
briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
•If you turn the control dial, you can also restore the sound.
To turn off the power
Press and hold 
for more than one second.
“SEE YOU” appears, then the unit turns off.
•If you turn off the power while listening to a CD, CD play will start from where playback has been stopped previously, next time you turn on the power.
3 Adjust the volume.
To increase the volume
To decrease the volume
Volume (or audio) level indicator (see page 15)
Volume level appears.
CAUTION on Volume Setting:
CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a CD and adjust it as required during playback.
5
