BASIC OPERATIONS

ENGLISH

1

3

2

Turning on the power

1 Turn on the power.Note on One-Touch Operation:

When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.

2 Select the source.To operate the tuner (FM or AM), see pages 7 – 9.To play a CD,see pages 10 – 13. To play an MP3 disc,see pages 16 – 20.
4 Adjust the sound as you want. (See pages 21 and 22.)To drop the volume in a moment

Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.

To resume the previous volume level, press the button briefly again.•If you turn the control dial, you can also restore the sound.To turn off the powerPress and hold for more than one second.“SEE YOU” appears, then the unit turns off.

•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.

3 Adjust the volume.To increase the volumeTo decrease the volume

Volume (or audio) level indicator (see page 24)

CAUTION on Volume Setting:

Discs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.

Volume level appears.

5