RADIO OPERATIONS

ENGLISH

Listening to the radio

You can use either automatic searching or manualsearching to tune in to a particular station.
Searching a station automatically: Auto search
1 Select the band (FM 1 – 3, AM).Each time you press the button, the band changes asfollows:FM1 FM2 FM3 AMSelected band appears.

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

Note:This receiver has three FM bands (FM1, FM2, FM3).
• FM1/FM2:

87.5 MHz to 108.0 MHz

• FM3:

65.00 MHz to 74.00 MHz

To stop searching before a station isreceived, press the same button you have pressed for searching.
Searching a station manually: Manual search

1 Select the band (FM 1 – 3, AM).

Each time you press the button, the band changes as follows:

FM1 FM2 FM3 AM

Note:

This receiver has three FM bands (FM1, FM2,
FM3).

 

• FM1/FM2:

87.5 MHz to 108.0 MHz

• FM3:

65.00 MHz to 74.00 MHz

2 Press and hold ¢ or 4 until “M” (manual) starts flashing on the display.
2 Start searching a station.To search stations of higher frequencies To search stations of lower frequenciesWhen a station is received, searching stops.CONTINUED ON THE NEXT PAGE

7